76% compared with 2015. With the increase in market penetration of health and medical products, the output of coil products produced with multi-die equipment will soon surpass that of single-die equipment. At present, domestic equipment manufacturers have introduced the latest spinning systems, hot rolling mills, winding machines, and slitting machines. The net forming machine is also equipped with a new drive and net forming system. In recent years, domestic multi-die head production lines have become the starting point for the transformation and upgrading of enterprises. At present, the number of domestic multi-die heads has reached close to 200.

The actual production volume of China’s spunbonded nonwovens in 2016 is also related to the increase in demand Disposable KN95 mask in the sanitary material market and sufficient orders. This is a big leap.

According to statistics, the number of enterprises with actual output exceeding 10,000 tons reached 63, an increase of 13 from last year.85%.92% over 2015. The average number of production lines owned by each company has reached 2.98%; 112 PET spunbond nonwoven production lines, an increase of 7.59% of the total spunbond fabric. Equipment manufacturing technology has gradually matured and has obtained considerable returns. Among them, there are 3 enterprises with more than 50,000 tons and 16 enterprises with 20,000 to 50,000 tons.

The actual output of the online composite SMS nonwoven fabric was 468,419 tons, accounting for 17. The output of conventional single-end spunbond fabric increased slightly

In 2016, the main uses of conventional single-end spunbond fabrics include packaging, building materials, agricultural use, etc.35% of the total spunbond fabric. Statistics in 2016 reflect that the average output scale of enterprises has increased significantly, especially in recent years that new enterprises have achieved rapid development through scale up. The level of equipment manufacturing still needs to be improved

At present, the maximum operating speed of the imported equipment exceeds 1000 m/min, while the domestically produced equipment has no models that can operate stably at a production speed of 600 m/min. But such a price difference does not seem to affect the choice of high-end consumer groups for high-end products. With its excellent performance and high cost performance, it is sought after by users of waterproof materials. Although it is far below the growth rate of medical materials, the market demand is stable., with a slight increase in output of about 3%.5 percentage points respectively over the growth rate of the previous year.

3.

In PP products, the output of traditional Chinese medical and sanitary spunbond materials (including SMS categories) and conventional single-end spunbond fabrics will almost be evenly divided. There were 1169 PP spunbond nonwoven production lines, an increase of 5.

It took only 4 years for the spunbond filament polyester base fabric to double the production of PET, and its proportion in the total output of spunbond fabrics increased from 7% to 11%. At present, spunbond or spunmelt nonwoven fabric roll companies have made breakthroughs in the soft and skin-friendly, elastic and smooth, moisture-conducting, and air-permeable properties of their products, and their sales are increasing. Spunbond nonwovens for medical and health use will become the main force

In the past five years, most of the new investment of enterprises has been directed to multi-die head equipment, and non-woven fabrics produced by domestically-made multi-die head equipment have been accepted by downstream customers.

As of December 2016, there were 70 continuous meltblown nonwovens production plants, the same as the previous year.42%. According to statistical data analysis, currently medical and health spunbond nonwovens account for nearly half of PP spunbond fabrics, and the growth rate in 2016 is about 20%.55% of the previous year. The actual production volume is 68.

Production capacity and actual output increased by 1. The number of small domestic companies with only one production line has been greatly reduced.

There were 91 online composite SMS nonwoven production lines, an increase of 18. The price of hot air cloth on the market is almost double that of spunmelt cloth. What is the market development of spunbond non-woven fabrics now, let’s take a look together next.67. At present, the country’s increased environmental governance has increased the demand for air filtration, water filtration, and chemical filtration.69%.

There is a self-developed Y-shaped three-high hot rolling mill in China, which greatly reduces the roll change time, significantly improves efficiency, eliminates operational safety risks, and improves the overall technical level of the production line. The PET spunbond nonwovens market is still in a period of rapid rise

Encouraging PET spunbond nonwovens production plants to increase market supply has become the driving force for the growth of PET filter materials.48%.

5. This is an important progress.18%; 166 continuous meltblown nonwovens production lines, an increase of 14.07% of the total spunbond fabric; the current domestic actual total output of spunbond nonwovens is 2,663,194 tons, of which the actual output of PP spunbonded nonwovens is 1,900,080 tons , Accounting for 71. According to the number of newly added production lines far more than the number of newly added production companies, and the increase in 10,000-ton capacity companies see.

4.. According to analysis, the increase in capacity utilization is related to the fact that more new equipment adapted to market demand can be put into production in the first half of the year. The actual output of spunbond nonwovens totaled 2,663194t/a, an increase of 12.

There are 1,372 spunbonded nonwoven production lines in China, an increase of 88 lines over the previous year, an increase of 6. Competition for high-end products is becoming increasingly fierce

The high-end market for sanitary products seems to still recognize hot air cloth and cotton spunlace cloth, and consumers have a soft spot for fluffy and softness.Spunbond nonwoven fabrics of recent textile development

Spunbond non-woven fabric

Now, the hot air non-woven fabric market is slowly eroding the spunbonded fabric market. The actual output of PET spunbond nonwovens is 294,695 tons, accounting for 11. However, we have to admit that the gap is huge when comparing international advanced technologies.

(2).

(1) Changes in the industrial structure show multiple characteristics:

1.

In recent years, due to the country’s comprehensive liberalization of the two-child policy, emphasis on health and elderly care services and the impact of consumption upgrades, medical and health spunbonded nonwovens have become an eye-catching growth highlight.

The investment enthusiasm for multi-die equipment has not diminished, and there is still broad room for expansion.25% of the production capacity, slightly higher than the 67. As of the end of December 2016, the domestic production capacity of spunbonded nonwovens production lines totaled 3,902,200t/a, an increase of 11.

2. There are a total of 514 spunbond nonwoven fabric roll production enterprises, a net increase of 31 over 2015, an increase of 6.5 and 3. As the main product of the industry for many years, it is a conventional single-head PP spunbond nonwoven product. The scale of the industry shows a steady growth trend

my country’s coil production enterprises have developed in the direction of product structure diversification, production line function specialization, and enterprise scale. The promotion and application of multi-die head technology has produced good social benefits and accelerated the pace of technological innovation in the entire industry