giugno 2021 - car diagnostic tool

Autel IM608 Mercedes Benz Add Key and All Keys Lost Car List

Here comes the Mercedes Benz vehicle coverage of Autel MaxiIM IM608 (or IM508 with XP400), including add key , all keys lost and Immo part replacement functions.

Functions	Modes	EIS type	Supported EIS type
Add key	OBD/on bench	EIS(CAN-line)	W164 -2008, W164 2009-, W166, W169, W172, W197, W204, W207, W209 2006-, W211, W212, W216, W218, W221, W246、W251 -2008, W251 2009-, W639/2009-, W906
Add key	OBD/on bench	EIS(K-line)	W202, W203, W208, W209, W210, W215(some supported)、W220、W230, W463, W639
All key lost	OBD	3^rd CAN EIS	W164 2009- , W169, W172, W204, W207, W209/2006-, W211, W216, W251/2009-, W639/2009-, W906（use with G-BOX 8 time faster）
	On bench	3^rd Generation EIS：	W164 -2008, W164/2009-, W169, W172, W204, W207, W209/2006-, W211, W216, W221, W251/2009-, W639/2009-, W906（use with G-BOX 8 time faster）
	On bench	EIS(K-line)	W202, W203, W208, W209, W210, W215、W220、W463、W639（use with G-BOX 8 time faster）
IMMO part replacement	OBD/on bench	EIS replacement （Read/write/erase）	W164/-2008, W164/2009-, W166, W169, W172, W197, W204, W207, W209/2006-, W211, W212, W216, W218, W221, W246, W251/-2008, W251/2009-, W202(K), W203(K), W208(K), W209(K), W210(K), W215 (K), W220 (K), W230 (K), W463 (K), W639 (K)
IMMO part replacement	OBD/on bench	ELV replacement （Read/write/erase）	W204, W207, W208, W210, W212, W169(NEC), W209(NEC), W211(NEC), W906(NEC), W209(Motorola), W211 (Motorola)、W906(NEC), W639/2009-, W906(Motorola)

If you want to know more about Autel OBD2 Scanner, please free contact us: sales@obd2tool.com

https://autelscantools.blogspot.com/2021/05/autel-im608-mercedes-benz-add-key-and.html

How to Program old Volvo CEM All Keys Lost by Autel IM608

It is nice to know that Autel does Volvo and fine. Here is some tips to program Volvo older models (remote key) when all keys lost by Autel IM608.

Model example:

2008 Volvo V50

5 buttons remote key

Success

all keys lost genuine key programmed including remote functions

How-to:

The genuine key was bought online

brand new genuine remote with barcode (5 buttons).

Read CEM on the bench

Learn the remote by obd with the bar code.

Using Autel Scanner IM608 with XP400 (I did read CEM with vvdiprog first as I hadn’t used the xp400 Key Programmer on them before and wanted a backup in case there was any issues but the xp400 read it perfectly)

https://autelscantools.blogspot.com/2021/05/how-to-program-old-volvo-cem-all-keys.html

GM Saab PSG16 Programming by Tech2 via SPS

Question:
I need to program a psg16 pump vp44 (the Opel Vectra 2.2 dti car got several electrical errors due to a PSG16 change). I see that gm tech2 scanner can do it. If I buy a new PCMCIA card, can I get it working? the MDI/MDI2 can I also program?
Answer:
You can flash/swap PSG16 pump via SPS original software.
If you want to program PSG16 you can easily do it with tech2 and TIS2000, GlobalTis v32 or Tis2web. You can buy any card because you can overwrite the software that you need from TIS.
You also can use GM MDI or GM MDI2 or AVDI or any good/approved J2534 tool can be used to do SPS Programming in PSG16.
You download sps on PCMCIA card then cut from card read.
gm-tech2-psg16-sps-programming

EDC 15 / PSG 16 Reprogramming by Tech2 via SPS

Follow the description below carefully to ensure success.

gm-tech2-psg16-sps-programming.jpg

1. Connect TECH2 scan tool to the data link connector.

2. Start TECH2 and select F5: Service Programming System (SPS).

3. Select F0: Request Information.

4. Then select: model year, vehicle type, group, system

5. Follow the instructions in TECH2.

6. Disconnect TECH2 from the vehicle and connect it to the COM port of the computer (flat cable). TIS2000 must be installed on the computer.

7. Check that the software of the computer is newer than that of EDC 15/PSG 16. If so, download it to TECH2.

8. Disconnect TECH2 from the computer and reconnect it to the vehicle.

9. Start TECH2 and select F5: Service Programming System (SPS).

10. Select F1: Program control module.

11. Follow the instructions in Tech 2.

12. Wait until programming is complete. This takes approx. 7 minutes.

13. Once programming is complete: switch off the ignition.

14. Test start the engine.

15. Read and clear any DTCs in the control unit. A DTC will be generated because the pump control unit loses communication with EDC 15/PSG 16 during programming.

16. Final check:

Clear DTCs in all systems.

Execute one operating cycle (run the vehicle at varying engine load and speed for five minutes).

Evaluate the operating cycle (check that DTCs were not regenerated).

https://gmscantool.blogspot.com/2021/05/gm-saab-psg16-programming-by-tech2-via.html