Tag: Autel MaxiIM608

It is exactly the same if you use Autel MaxiIM IM608 PRO Auto Key Programmer to program Nissan Sentra all lost keys or add keys via OBD. Need all of our currently paired keys for the process. The keys are first deleted and added back later.

Procedure
Plug in J2534 VCI to OBD2 port, generally located underneath the steering column.
Pair the VCI with Autel IM608.
IMMO >> Accept >> Nissan >> Automatic selection
Turn on the hazard warning light.
Open and close the driver door once.
Immo/smart system >> Immobilizer remote control learning >> Smart key learning
Turn on Hazard switch.
Turn off ignition switch or power switch.
Turn on and turn off the driver’s door once.
This procedure erases all registered key ID.
Therefore, all of the customer’s keys should be obtained before starting this procedure.
Press “Yes” to continue.

Operate according to the following procedures:
Press push button ignition switch for 2s or more and turn ignition switch to the ON position.
Turn off the ignition!
Press the push start button once, attach the Nissan Smart Key that needs to be programmed to the push start button.
Whether the instrument lights up automatically? Yes
Key programming successfully.
Press “Yes” to program next key. “No” to go on next step.

Turn off the ignition!
Press the push start button, attach the back of an already registered key to the push start button.
Whether the instrument lights up automatically? Yes.
Turn off the ignition and wait for 3s!
Key programming succeeded.

Perform followings to check the keys:
Open and close the door once.
Click the unlock and lock key once, start the engine and wait for 5s.

             

Question:
Fiat 500 add two new keys but how do I make them dealer keys so they will program by the Autel MaxiIM IM608 ? I have one working key and im608 read pin correctly.

Suggestion:
Need to read immo data first there should be make dealer key option once you’ve ready immo data. It’s not just pin must read immo data. You have to read immo data make a dealer key learn the keys 100% .
If you have a working key you select 2 keys to program or in this case you would select 3 keys to program as you wants to add an original and 2 new remotes.
Program working key first followed by the next 2
Unavailable keys are only erased permanently from the system and cannot be used again once the procedure has been completed.
Go into immo system first and you will see –
Read password
Generate dealer key
Program key
Follow in that order
Program original in first followed by 2 new keys.
User feedback:
Turns out the Autel im608 read it as an arbarth but in arbarth there no precode functions to read the actual bcm and then make the dealer keys. So I handy I go in manually into fiat – fiat 500 instead of by vin into arbarth. Once in there the read immo data function was there so I did that abs then made the dealers keys in the xp400 then moved on to code them in the ignition.