Different Techniques for Fixing QuickBooks Error 12057

QuickBooks Error 12057 is a type of update error in QuickBooks Desktop. This issue may suddenly appear as you attempt to download the new updates for QuickBooks. The major reasons for QuickBooks error code 12057 are wrong SSL settings, internet connectivity not being seamless, insufficient privileges, etc. To get a hold of this error, make sure that you go though the full length of this article.

What leads to QuickBooks Error code 12057?

This update error in QuickBooks can occur due to any of the following reasons:

  • Incorrect SSL settings may lead to Error 12057.
  • Some network maintenance may be going on in the background.
  • Poor internet connectivity can be another primary reason for this error.
  • Insufficient admin rights can also provoke Error 12057 while you update QuickBooks Desktop .

Technical way outs against QuickBooks Error code 12057

The different ways to get this issue fixed are:

Way 1: Update QuickBooks manually in the safe mode

  • Type msconfig in the start menu and press Enter.
  • This opens System Configuration Here, click on Safe Mode and also Selective Startup and Load services check boxes.
  • Now, go for a system restart and keep pressing the F8 key repeatedly. This will lead to the Advanced Boot Options screen.
  • Choose Safe mode with networking and hit Enter .


  • As the Desktop loads up, go to Intuit website and manually download the update file and run it to start with the installation of the update.

Way 2: Turn on SSL 2.0 and SSL 3.0

Incorrect SSL settings may also be a main cause of QuickBooks Error code 12057. The steps to handle it are:

  • First of all, run the QuickBooks Desktop program.
  • When the program s, go to Help and choose the Internet Connection Setup option.

  • Choose the option to let the program use the Internet connection settings to set up a connection to the Internet.
  • Now, click on Next and then on Advanced. Here, you need to click on Advanced Connection Settings option.
  • Go for the Security option and click on the option to Use SSL 2.0 and Use SSL 3.0.

  • Hit on Ok, followed by done.
  • When all the processes are completed, try to update QuickBooks.

Way 3: Open the PC as administrator

  • Access the Control Panel and from there go to User Accounts.
  • Click on allow all the administrator permissions for the user.
  • Followed by that, right-click QuickBooks icon.
  • Now, click on Run as administrator option.

  • Go to the Help menu now, then attempt to update QuickBooks.

Way 4: Repair QuickBooks

Another useful approach to fix QuickBooks Error code 12057 is by repairing QuickBooks. The steps for this are:

  • Go to Control Panel and from there, head to Programs and Features.
  • Now, go to QuickBooks and click on Uninstall/Change.
  • Click on the Repair option and wait for it to conclude.
  • When the process is done, run QuickBooks again, go to Help, and then click on Update QuickBooks Desktop. This should solve the issue on your system.

Way 5: Go for Windows update

One should make sure that all the windows components are updated to their latest versions. For this, an easy way is the Windows Update feature. It includes the following process:

  • Click on Start and from there search for “Update”.
  • Click on Search for updates icon and click on all the available updates.
  • Now, begin the download process. Restart the PC and let these updates install on the system.
  • This should fix QuickBooks Error 12057. This can be verified by trying the QuickBooks update again.


Summing up!

This blog covered all the fixes you need to handle to fix QuickBooks Error code 12057 . If you are seeking technical support, just give our QuickBooks ProAdvisors a call at the helpline 1-800-761-1787.

How Can I Troubleshoot QuickBooks Payroll Error 2000?

QuickBooks Payroll can experience QuickBooks Error 2000 when users try to process payroll operations. This error can be caused due to network disruptions, data issues, outdated QuickBooks program, and other factors.  This article uncovers different methods to help you effectively fix QuickBooks error code 2000. So keep reading!

Factors Triggering QuickBooks Payroll Error 2000

This error can be resolved by the following:

  • Data transmission failure leading to QuickBooks Payroll Error 2000.
  • Network-related issues causing Payroll Error 2000.
  • Failure to retrieve the latest data from the server may result in the error.
  • Changes in account information unrecognized by the server can lead to error 2000.
  • Usage of an outdated version of QuickBooks Desktop.
  • Corruption or damage to essential .ini files associated with QuickBooks.

Troubleshooting Methods for QuickBooks Payroll Error 2000

This section contains different methods that should help in the easy fixation of QuickBooks Error code 2000. So, read it carefully and perform the steps carefully.

Method 1: Provide Correct Banking Credentials

Incorrect banking credentials could possibly result in QuickBooks Error 2000. So, the user should login while carefully entering the correct credentials. Follow the steps for a better understanding.

  • Access your bank’s website and navigate to the login page.
  • Enter accurate login information to access your account.
  • If login credentials are entered incorrectly, retry carefully.
  • Utilize the “Forget password” link if login issues persist, and follow on-screen instructions to reset the password.
  • Verify resolution of QuickBooks Payroll Error 2000.

Method 2: Use QuickBooks Install Diagnostic Tool

QB Install Diagnostic Tool is one of the many tools in QuickBooks Tool Hub. This tool can be used by doing the following:

  • Download and install the QuickBooks Tool Hub from Intuit.
  • Open the Tool Hub and choose the QuickBooks Install Diagnostic Tool from the Installation problems menu.
  • Wait for the process to complete; afterward, confirm resolution of QuickBooks Error 2000.

Method 3: Rename.ini File

QBWUSER.ini file should be renamed. This can resolve QuickBooks Error code 2000 in many cases.

  • Navigate to the QuickBooks Folder and locate the QBWUSER.ini file.
  • Right-click on the file, choose “Rename,” and append “.old” to the file name, transforming it to QBWUSER.ini.old.
  • This prevents QuickBooks from accessing the file, compelling the generation of a new, error-free one.

Method 4: Update QuickBooks

Try the QuickBooks update again. If the automatic method fails, try the manual procedure. The steps for the same are:

  • Click on the ‘Help’ option in QuickBooks Desktop.
  • Choose QuickBooks Update, select the “Update Now”

  • Opt for “Get Updates” to initiate the QuickBooks software update.

  • Restart QuickBooks Desktop after the update to check for resolution of QuickBooks Error 2000.
  • If the error shows up, go to Intuit and download the updates manually.
  • Now, install the updates by double-clicking the downloaded update file.


Method 5: Repair QuickBooks

QuickBooks repair is possible just like other programs. The steps are:

  • Go to Start and open Control Panel.
  • From there, you need to click on Programs and Features.
  • Then choose QuickBooks and subsequently click on Uninstall/Change.
  • Next click on Repair.
  • Restart the PC and run QuickBooks. This should fix Error code 2000 in QuickBooks

Winding up!

This blog explained various methods that should fix QuickBooks payroll error 2000 on the system. If you need any technical assistance, just call our experts at the helpline 1-800-761-1787.

Walkthrough Discussing the Rectification of QuickBooks Error 1334

QuickBooks users can counter different update errors. QuickBooks Error Code 1334 belongs to this domain of errors. Its causes constitute damaged Windows registry, virus, QuickBooks being installed incompletely, threat caused by background programs, including other factors. Read the blog to the full to get a better understanding of this error and the various ways of fixing QuickBooks error 1334.

Different strategies of QuickBooks Error 1334

The causes of this error are:

  • Virus intrusion on the computer
  • Damage in the Windows registry
  • Conflicts with background program.
  • incomplete QuickBooks Desktop installation
  • Accidental deletion of important QuickBooks files

Step-by-Step walkthrough for QuickBooks Error 1334

The multiple fixes for Error code 1334 are:

Solution 1: Switch to Safe mode

Switch to the safe mode and try the update process again. Follow the steps for your convenience:

  • Press Win and R keys simultaneously to open the Run
  • Need to type “MSConfig” and then press Enter to open System Configuration.
  • In the “Boot” tab, select “Safe boot” and click OK.
  • Restart and press F8 to enter Safe mode with Networking.
  • Open QuickBooks, go to Help, and click Update QuickBooks.”
  • If unsuccessful, manually update QuickBooks from Intuit’s website.
  • Open MsConfig, select Normal mode, and restart to verify resolution.

Solution 2: Delete unnecessary temp files

Removal of the temp files can fix the issue. The steps to be implemented for this are:

  • Access Disk Cleaner via the start menu.
  • Choose the C Drive and mark temporary files for cleanup.
  • Clear browser history and cache files.

Solution 3: Try the System Restore feature

Restoring the system to an earlier time can potentially fix the error. For this, the easy steps are:

  • Log in as an administrator.
  • Navigate to “Programs” > “System Tools” > “System Restore.”
  • Select a recent Restore Point and proceed with the system restore process.

Solution 4: Check the company file extension

Wrong file extension can also be a cause of this error. The rectification of the extension should fix Error code 1334. The steps are:

  • Navigate to Drive:/Users/Public/Documents/Intuit/QuickBooks.
  • Verify the correct file extension (.qbw) of your company file.
  • If incorrect, right-click, choose Rename, and rectify the extension.
  • Open QuickBooks to check for Error 1334 during updates.

Solution 5: Update QuickBooks manually in Safe Mode

Try the update in the Safe mode. For this, the steps are:

  • Go to Start, search for “msconfig” and hit Enter.
  • Windows Configuration will open. Click on Selective Startup and load services.
  • Hit on Safe Mode and restart the computer.
  • As the PC loads in the Safe mode, go to the browser, then go to Intuit website and download the latest updates of QuickBooks manually.
  • Now, open the downloaded file and get the update installed on the computer.
  • This should fix QuickBooks Error code 1334.


This blog explains different methods to fix QuickBooks Error code 1334. If you come across more such issue, just give us a call at the helpline 1-800-761-1787.