Aeration and aeration and oxygenation with aeration agent

The tube expands when inflated, the micropores open, and when the air stops, the micropores are closed. Since there is no ready-made pipeline equipment, it needs to be selected in the market.So how much do you know about the aeration tube of the aerator? Today, I have sorted out some problems about the aeration tube in use.. When the water level deepens, it shows its advantages. It can prevent clogging better than the rigid tube, but the micropores are difficult for the tube to lose its elasticity after aging Open. Connect the joint on the PVC main pipe with the aeration pipe with a hose. So the quality of the pipe is very important.

It should not be tied too tightly. 1 Thereby, the stocking density can be increased, the feeding intensity of the breeding objects can be increased, the growth can be promoted, the yield per mu can be greatly increased, and the purpose of increasing Paddle Wheel Aerators Manufacturers the breeding income can be fully achieved. Three-phase four-wire cables should be used. To increase the amount of dissolved oxygen in the water. Such as vortex air pump, displacement blower. supplies aquatic aerators. The starting voltage of the aerators should be within the specified range. The air pump should also have an air filter device during the working process.

There are two main ways to improve the effect of aeration: aeration and aeration and oxygenation with aeration agent. Reasonably determine the startup and operating time of the aerator. The aerator is a device that drives working parts through a power source such as an electric motor or a diesel engine, so that the oxygen in the air is quickly transferred to the aquaculture water. Every winter, the whole machine should be derusted and repainted for maintenance.

The above is all the contents of the aerator introduced for you today, I hope to bring you some help. The correct use and maintenance of aquatic aerators is also an important part of improving the aeration effect. At ordinary times, care should be taken to remove the moss and algae debris on the impeller and stomata to ensure that the design parameters of the impeller remain unchanged, and often check whether the working condition is good. Microporous aeration is to arrange the polymer microporous oxygen aeration tube at the bottom of the water and perform aeration from the bottom of the water so that the dissolved oxygen can be evenly distributed throughout the water body.