It is not allowed to work with illness to avoid damage to other parts. As the frictional torque on the sealing surface of the rotating metal joint will generate frictional torque during operation, a rotation stop rod must be installed in the rotation stop hole to eliminate it to avoid premature failure of the metal hose due to force.

Special attention should be paid to the new equipment, and the slippage must be added when necessary;try to install the machine concentrically, after installation, the entire rotating metal joint is working in a free state within the allowable range, otherwise the seal ring will be affected when the joint shakes during operation.

Cause unnecessary downtime and maintenance. Generally, the diameter of the rod is 2mm smaller than the anti-rotation hole, so as not to affect the free adjustment and compensation of the rotating metal joint;The rotating metal joint that circulates the heating medium should be gradually heated to avoid sudden temperature changes. If the machine is not used for a long time, it will cause scaling and rusting inside the rotating metal joint.

Appropriate support should be provided for the pipes and accessories connected with the metal hose;Abnormal wear or rupture;The rotating metal joint should be connected to the pipeline JB Pipe Fittings Suppliers with a stainless steel metal hose, and the metal hose should have sufficient length and should not be stressed or compressed. If leakage occurs during use, immediately stop using it and prepare for repairs.

This can prevent damage to the internal components of the joint from leaking or rupture of the graphite sealing ring; Please be aware that it may jam or drip when it is reused.The installation and maintenance methods of the rotary joint include:the rotating metal joint should avoid collision or falling during the transportation and installation process, otherwise it is easy to cause internal parts to break, etc.