How to Update Netgear Extender’s Firmware Via

If you have set up a Netgear WiFi range extender at your home to enjoy seamless internet, then it is your duty to take care of it. And, you can ensure the healthy life of your extender by updating its firmware timely.

Performing Netgear extender firmware update will not only optimize the extender’s functionality but also protect it from security threats. The list of advantages of updating the extender’s firmware doesn’t end here. It also adds new features and fixes bugs and errors. All in all, the Netgear extender firmware update will gift good health to your WiFi device.

So, without any delay, let’s head towards the guide to perform Netgear extender firmware update.

Steps to Perform Netgear Extender Firmware Update

The latest firmware version for your Netgear extender can be updated by accessing the mywifiext page. Now, go through the below-mentioned instructions and perform Netgear firmware update:

  1. Turn On Your Netgear Extender

First of all, you need to power up your Netgear wireless range extender. Therefore, look for a working wall outlet in your home and plug your Netgear extender into it. Switch on the Power button. Do not move to the next step until the power LED on your WiFi device turns green.

  1. Connect Your Extender and Router

After your extender is powered up properly, it is time to make a connection between your Netgear extender and router. You can connect both your WiFi devices either wirelessly or using an Ethernet cable. But, connecting them via an Ethernet cable will make the connection more stable. So, go for a wired connection. Keep in mind that it should be finger-tight.

  1. Switch On Your PC

Once your extender and the router are connected properly, turn on your computer. Open any web browser like Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Internet Explorer, etc, and head towards its address bar. Once there, type in it. Press the Enter key.

But, make sure that your web browser is updated. Also, to avoid any inconvenience in the Netgear firmware update process, clear the browsing history, cookies, and cache from your web browser.

  1. Log in to Your Netgear Extender

Hitting Enter will redirect you to the Netgear extender login page. Now, to log in to your WiFi device, enter the default username and password in the required fields. Bear in mind that the default login details are case-sensitive and even a little mistake is unacceptable. So, we recommend you type them carefully. Also, turn the Caps Lock key on your keyboard off while typing the default login credentials.

Click the Log In button after entering the default username and password of your Netgear extender.

Note: If you have changed your extender’s login details in the past, it is advised to use the changed username and password. Otherwise, you will see a message saying ‘incorrect login details.

  1. Update Your Extender’s Firmware

Hitting Log In will redirect you to the Netgear extender setup wizard. Now, head over to the Settings menu and look for the Firmware Update option. Thereafter, click the Check option to see if there is a new firmware available for your extender. If it is, then follow the on-screen prompts and perform Netgear extender firmware update. Do not refresh your web browser or turn off your extender while updating the firmware as it may corrupt your extender’s firmware.

In this way, you can perform Netgear extender firmware update. After performing firmware update, your device will reboot automatically. Once done, connect your WiFi-enabled devices to your extender’s network and enjoy the internet.

In the Nutshell

This was all about how to update your Netgear extender’s firmware via . We hope that you’ll be able to do so and enhance your extender’s performance. If you found this write-up helpful, then don’t forget to leave a word of appreciation in the comment section.

How to Update Netgear Extender’s Firmware Via modifica: 2021-10-05T08:25:06+02:00da mywifiexxt