Tag : china-solar-plastic-shrimp-feeder

Check the wiring to see if there is a lack of phase operation

When the aerator is started, it is necessary to closely observe the steering and running conditions. If there is a buzzing sound when the aerator is working, check the wiring to see if there is a lack of phase operation.With the development of intensive fish farming and intensive fish farming, the use of aquatic aerators has become more and more widespread. The protective cover is a device to protect the motor from water and must be installed correctly. The working conditions of the aerator is bad, and the user should be equipped with thermal breakers, thermistor protectors and electronic protection devices.

During maintenance, the whole machine should be placed on a dry and flat ground, and the pontoon support rod, reduction box, impeller shaft, motor, etc. For example, the rectangular pool is of waterwheel type, and the square or round pool is of impeller type. For the safe operation of the aerator, when installing the aquatic aerator, the power supply must be cut off. When the aerator is launched into the water, the whole should be kept horizontal or moved into the water at a small angle to prevent oil from spilling in the air vent of the reducer. Jet aerator: Aerators with aeration efficiency that exceeds that of waterwheel type, air-filled water spray, etc.

Waterwheel type aerator: suitable for deep silt ponds. The impeller type aerator can basically meet the aeration needs of fish ponds per kilowatt of power. It is strictly forbidden China Solar Plastic Shrimp Feeder for the motor to come into contact with water, so as not to burn the motor due to water immersion. The aerator should be installed in the center of the pond or at a windward position, more than five meters away from the embankment, and fixed with a plunger or anchor. Too deep will increase the load on the motor and damage the motor.

Generally, the type and load of aerators are determined according to the water depth, area and pool shape. The aerator should be repaired and maintained after each year to ensure normal operation in the coming year. The remaining part shall be led to the shore power source as required.