The current workshop requires a compression time of 50 minutes. 4, collect the small exhaust valve, use the outer steam opening to adjust the tank pressure.The fermenter empty dishes is what the fermentation tank is confirmed that the fermentation tank has not been placed in the fermentation tank, and the entire tank is sterilized.

Turn off the feed valve to open the exhaust valve and bypass automatic valve and all small exhaust. Fermentation tanks have been eliminated by: The valve opening is larger than the secondary valve. Fermented tank sterilization steps: empty wreath – feed – cancellation. The open-eye steam is then open to direct steam somarium steam and bottom steam, and the steam valve should be opened first, and the valve is opened.

The sewage pipe is turned out of a period of time before the bottom steam is closed, and the sewage valve and pipe are sterilized to prevent sewage occlusion. Emaining is that the scope of application is not just on the fermenter, and beer brewing equipments the laboratory and the industrial use empty whatever. Tank with a gas-liquid separator To ensure that the steam connecting the gas-liquid separator is in an open state.07MPa, must ensure that the exhaust valve is smooth (can be smashed but cannot be dying) to ensure the exhaust valve through.

When the liquid temperature is heated to 85 degrees, the outer surface steam strip is turned off after the bottom of the steam, direct steam, and sampling steam. The laboratory basis is a microorganism for the fermentation tank for a long time without using or fermentation to eliminate the tank, preventing microorganisms to grow in cans (especially for those microorganisms). The fermenter is stirred and opens the two valves on the enemy pipe.