gennaio 2022 - Technology Information

Easy Ways Of How to Setup Linksys Wifi Extender

Manual Configuration for Linksys Extender Setup

Before anything else, to access the Linksys Wifi Extender setup you need to connect your extender with an updated laptop, desktop, smartphone, or a tablet computer.

Now you need to establish a connection between your device and Linksys extender through an Ethernet cable to proceed further in the setting up process.

Linksys Extender Setup can be accessed with the IP address 192.168.1.1.
Instead of this IP address, you can also login to the page with extender.linksys com to open the setup page and go through the further procedure of new extender setup.

Now a page will open up asking you to enter your login credentials. Enter your credentials as asked.
After entering your login credentials, you will be prompted to the new extender setup page.
From the options available on this page, select the wireless option, and proceed further.
In the wireless menu, you’ll get a lot of other options. From there, select the ‘Basic Wireless Settings’ option.’
Now, you have to select the radio button which is corresponding to the ‘Manual’ setup process.
After this, space will come up in which you will have to enter the SSID name of your home network to proceed further in the setting up process.
Now you will get the space to enter various security methods and passwords for your Wi-Fi extender and save the settings to finally complete the WiFi extender setup process.

Linksys extender setup is a very easy and simple process, but if you are not so sure about your how-to knowledge regarding the process, then it can be a really frustrating experience for you. Wi-Fi extenders are of great use as they provide a wide and more reliable Wi-Fi range.

Not able To connect with Linksys RE7000 Setup

Setting up Linksys RE7000 is time-consuming.

Linksys RE7000 Max-Stream™ AC1900+ Wi-Fi Range Extender can be installed with two methods, as a Wi-fi range extender or Access point respectively. This article will show you steps on how you can set up the Linksys RE7000 to Range Extender mode.

Linksys RE7000 Setup

Step 1:
Plug your Linksys RE7000 into the socket.

NOTE: The power light will turn orange which can take up to 1 minute

Step 2:
With the help of your computer or Mobile device, you will need to connect to with Linksys RE7000 Network.

Step 3:
Open any browser on your device and visit extender.linksys.com or 192.168.1.1

Step 4: Once you are landed on the Linksys RE7000 Setup page, you will have to follow the on-screen instructions to complete the setup of your Linksys wifi extender.

Alternatively, you can also set up the Linksys RE7000 to Access Point mode.

Setup Tp-link repeater using tplinkrepeater.net?

To setup tplink repeater using http://tplinkrepeater.net. Tp link Extenders have a really appropriate and straightforward web interface tplinkrepeater.net helps in configuring and to boost the extender to setup the extended network.

The web interface (www.tplinkrepeater.net) page for these extenders is as easy because it gets, this intelligibility permit the user to setup and use the network with no inconvenience. Tp-link Repeater is all by means the best range extenders present in the market right now. Their pocket-friendly price and superficial design allure many customers; moreover their top of the line hardware come up with a well-founded network extension. Tp-link supply wireless repeaters for all kinds home and business networking needs. Additionally to the powerful range extension that they will provide, they also look good doing it. Their simple design looks good with any quite decor within the home or the workplace.

Setup tp link repeater via tplinkrepeater.net or 192.168.0.254

Here, you can connect your tplink extender to your existing router and restate the routers signal to extend the range of your home/office network. The Tp link extender simply needs to be setup in correct way in order to boost the range of your router using tplinkrepeater.net. Following the beneath steps you can setup and access tplink login page with effortless manner.

Firstly make sure to power on your tplink extender and once the LED light up extender is ready to setup.
Then connect your device with Tp link extender SSID.
Now from your connected device open any web browser and in the address bar type net or tp link IP address http //192.168.0 254/ and click enter.
Once done then tplink extender login page will show up and it will scan your available existing Wi-Fi names, here select your main Wi-Fi name.
Here choose your network SSID for 2.4GHz and 5GHz bands
Then enter the password for router’s SSID and connect to it.
After that as per your need set your Wi-Fi name and password for tp link extender network and save the settings.
Your tp link extender setup is successfully configured and ready to enhance the range of your network even in dead zones.

Setup your Tp link with easy WPS – Push button method

Setup Tp-Link extender using WPS (Wi-Fi protected setup) method. TP-Link’s Wi-Fi Range Extenders helps in abolishing the dead zone areas from home/office by buildup wireless signals and enlarge networks up to 10000 square feet. Range extender mode helps to boosts wireless signal to earlier unreachable or hard-to-wire areas effortlessly. The Miniature size and wall-mounted design makes Tp-Link extender very easy to locate and move flexibly. And make the Tp Link extender setup effortless. Also the Ethernet port allows the Tp-Link to perform as wireless adapter. And the LED control function makes the Tp-Link a Night mode for peaceful sleep. The App makes it easy to access and management using any mobile device.

Firstly make sure to turn on and place your Tp Link WiFi extender closer to your existing router.
Then press and hold the WPS button on the Tp-Link extender.
Meanwhile at the same time within 2 minutes press and hold the WPS button on router also.
Hold on till device get connected, if still having issue then click http://tplinkrepeater.net.
Once done then LED WiFi turns to solid on the Tp Link extender.
Now just simply connect to your extender network using the default username and password.
Finally your Tp Link extender setup is successfully done.

SETUP OF TP-LINK AC750 RANGE EXTENDER WITH TETHER APP

TP link AC750 Range extender provides to boost your current Wi-Fi network. It goes around with external antennas, so it covers every corner of your house. It provides the speed up to 300Mbps. Also you can get the MU-MIMO feature, and you also move files to numerous devices. You can use the tether app to manage all devices.

Select the spot for the extender and connect the antennas.
Check the signals of the internet.
Then, attach the power adapter with the extender.
Check the power of the extender is on.
The user sees the power off then holds the on/off button of the extender.
Download & install the Tether app.
Then, write the details of the extender.
Now, scan the QR code now.
At the end, enjoy the latest extender.

LOG INTO THE TP-LINK WiFi RANGE EXTENDER

Open any internet browser.
And write www.tplinkrepeater.net or the IP address is 192.168.0.254.
Use the username and the password as the admin.
Then, log into the settings.
How to Firmware Update Oo TP-LINK RANGE EXTENDER
Firstly, open the internet browser.
And write www.tplinkrepeater.net or the IP address.
Use the username and the password as the admin.
Tap on the advance settings.
Then, hit on the firmware update.
After this, user can use the latest firmware of the extender.

FIRMWARE UPDATE OF TP-LINK WiFi RANGE EXTENDER WITH TETHER APP

Launch the play store on your device.
Then, download the Tether app from the play store.
And write the information on the extender.
Tap on the settings and click on the Tp link firmware update.
After that, user can get the message for the latest firmware.
At the end, you have the latest firmware of the extender with security patches.

SOFT RESET OF TP-LINK WiFi RANGE EXTENDER

Open the Internet browser.
And write www.tplinkrepeater.net or the IP address.
Then, apply the username and the password as the admin.
Tap on the advanced settings.
Hit on the factory reset.
To reset process it takes some time.
Now, TP-link extender is in the default settings.
Moreover, the user can again set up the extender.

HARD RESET OF THE TP-LINK RANGE EXTENDER

Firstly, search the reset button on the extender.
Push the reset button for two seconds by using the paper clip
After that, Lights are flashing.
Release the reset button.
Then, lights are calm.
The extender is in default settings.
And Set up the extender again.

SETUP OF TP-LINKTL-WA855RE RANGE EXTENDER WITH URL tplinkrepeater.net

Firstly, locate the place the extender at that
Then, check your network.
Fix it if it is not working
Unplug the modem.
You can attach the antennas with the extender.
Moreover attach the power switch with the extender and switch on the power.
The user can hold the on/off button of the extender. If extender is not working.
Then check the power of the router is on.
Now join the modem, extender, and laptop.
After this, use the Ethernet cable to join all devices.
Open the internet browser.
And write www.tplinkrepeater.net or the IP address is 192.168.0.254.
Use the username and the password as the admin.
After that, the user can see there is setup wizard on the screen.
Then select the country from the list and also select the language and time.
Scan the Wi-Fi.
If the scanning does not finished, the user can also enter the Wi-Fi.

Then enjoy your new extender and TP Link Wifi extender setup done now

ij.start.canon setup Guide to Install Canon IJ Printer

Are you in search of ij.start canon on Mac along with Windows PC? Even though it is true that there are many names for printers which are available to search , ij.start cannon is one of those shrewd choices of clients when it comes to deciding on the most suitable printer. Canon Contact Support printer is renowned for its top-quality print quality. For you to make use of this printer, you must become acquainted with the fundamental steps to the arrangement. In this article we’ll provide the rules and directions for that ij.start.canon setup measure. Now let’s start!

Ij.start.canon is an easy and speedy method to provide the ability to connect your printer to any other device, such as windows, Mac or iPhone. Furthermore, www.ij.start.cannon is a web address which provides access to download driver and software of Canon printer for your device. The site is used by all new users looking to set up their printer. Additionally, current users of the printer who wish to update their driver that is out of date can go to this website.

Setup Canon Printer on Windows (Wireless) – Canon ij Setup Guide

The first step is to download and install the driver for your printer via ‘Ij.start.canon’.
Make sure to turn off the Canon printer and ensure that it’s properly connected using an on/off switch.
After that then, open the downloaded version of driver setup, and then follow the steps until the moment you get to screen with the option of selecting “Wireless Setup”.
Once you have selected WiFi, open your Canon printer’s screen, and then tap the WiFi setting button.
Set the device’s settings, then click OK.
Next, choose Device Settings>LAN Settings. Then, press “OK”
LAN Settings>Wireless Lan Setup, and select OK. Your printer will then look for an access point.
Make sure you’re WiFi router is on. Now, the WiFi flash light will light up on the printer.
A network list will be displayed on screen. Choose the WiFi networks from that list, then click on OK.
It will then ask you for your WPA/WEP code (WiFi password). Enter your password correctly in the box and then click on the “OK” button
Within a matter of seconds, the printer will be connected to the WiFi network.
Therefore, following the steps above, you can effortlessly finish Canon ij wireless setup for your Windows system.

To ensure your printer is installed on your Windows system Follow these steps:

Navigate to the control panel’, and then select the the ‘device and printer’ selection.
Verify that your printer appears in the next screen by clicking a the green check mark. If not, you will need to manually turn it to the list by selecting the “Add printer.
Then you’ll be able to see a list of all available printers. Choose the Canon printer from the list.
Tap the next button and wait a couple of seconds for your printer to be added.
Once the printer is installed when it is added, you will see the printer being added by the green check mark.

How to set up Canon Printer on Windows via USB –

The first step is to first download firstly, the Canon printer driver and then complete the installation.
After that, connect your printer and Windows system using USB Cable.
Access the Control panel via the ‘Run’ dialog box via the Windows search feature.
type control panel in run box
Choose the ‘Devices and Printers’ option. Then you’ll find your printer’s green check-mark.
If you’re unable to locate your printer, simply click the “Add printer” to manually add it.
Print it out.

Then, your printer is ready to be added and be ready for use

Steps to Setup Canon Printer on Mac

Firstly, download and setup driver through ij.start.canon and go for the next step.
Follow the steps outlined in the previous section of this write-up to connect your Canon Printer on the same network with your other device.
Then, go to the ‘Apple menu and select the ‘System Preferences’.
Then click on the icon of a printer also known by the name of “Printers and scanners” from the System preferences
Simply click on the “+” sign present in the lower left-hand corner following the pop-up window will pop up.
You’ll find your printer’s name on the left-hand pane of your screen if it’s already connected to the network. Click it to start the configuration process.
When the process is complete the printer will show a green and be ready for use.

How do I connect my Canon Printer to iPhone?

Follow these steps to connect your Canon printer to your iPhone Follow these steps to connect Canon printer to iPhone

The first step is to first download your “Canon print” app in your iPhone or any iOS device from the app store.
After the application has been installed, ensure that the printer is connected and switched on.
Once the green light has remained solid on your printer press the “WiFi” option in your printer.
A blue light will start flashing at the top of the printer. If the light does not appear after a few seconds, select the “WiFI” button once more and hold it for several seconds until you hear the alarm sound two times.
After hearing the two alarms then release the button. Now, the light from the WiFi button will flash.
On your phone, open from your phone, and then open “Canon printer” app. Follow the instructions on the screen and accept your user’s agreement.
Then, select the option to adding the printer.
Click on the option ‘register print’. Then, scan the printer’s setup and then keep an eye out for additional instructions.
There are two options on the mobile screen. The first is “Connect via wireless router (recommended) and the other “Direct connection” “Direct connectivity”. Select the option “Connect via wireless router”.
On the next screen, you will be instructed to connect your phone via your WiFi for the final configuration in “Canon printer”.
Choose the “settings” button and join the WiFi to the wireless network “Canon setup”.
Go returning to “Canon printer” app on your phone. When the screen displays the option of connecting WiFi to the Canon setup, tap “OK”.
Then, select a name for the wireless network.
Then, click on the choice of wireless network, and then enter your WiFi password and click “OK”.
The settings of your setup will be sent towards your printer. Then, click “OK” once again.
The name of your printer will be displayed on the screen. Choose it, and then click “OK”.
Thus, it is the final step in connecting your printer to Canon printer and iPhone.

Install Canon inkjet printer using ij.start Canon

Follow the most frequently used and straightforward steps to set up your Canon IJ printer. Check the following steps;

First, you need to start your system as a laptop or PC.
Second Connect your Canon Inkjet Printer to the system via either wireless or wired (If you own a Wireless Canon device)
Third, open a web browser (default or another) and type ij.start.canon within the bar.
Enter the code, then be patient for Canon website to load. It will guide you through various ways to proceed.
Click the Configure button and open a new window to prompt you for the model number.
Enter the Canon model’s number. press Enter then install the configuration.

Download the Canon Printer Drivers

In the current Canon model, you won’t see the CD. However, in the event that you are using previous versions, you could install CD. Otherwise, check the entire download procedure through ij.start Canon for Canon driver download from the following procedure.

Install the Canon printer and then open the web browser on your computer.
Go to ij.start.cannon site and enter the Canon Model number when you are asked.
You can also pick from the bottom menu options and click “click here” to activate “click this link” from the list.
Begin downloading Canon drivers as well as software using the page at ij.start.canon page.
Double click now on the program and then install it for you Canon product.

A Complete Guide to Installation for Canon IJ Setup

Follow the guide below and configure your Canon printer.

Download the software – Visit ij.start.canon to download your Canon driver.
Install and select connection type – Double tap on the file and choose the wireless connection as well as USB connection.
Switch ON the Canon printer. Hit the button power on the printer.
Connect WiFi – To establish an internet connection make sure you press while holding the wireless alarm until you connect.
The lamps are flashing green and blue If you notice this type of situation, it is a sign that the printer is connected to WiFi.
Accept the terms of install and install. Read and accept the terms of license that Canon setup for installation.
Complete with the setup of your printer from Canon Click Complete to complete the last step.

Process to Install the Canon Printer Driver via Ij.start.canon

To learn step-by step instructions for installing the ij.start.cannon driver for your printer on your system You must follow the steps below.

Start the installation of ij.start.cannon driver after connecting the printer with the internet. There are a variety of options to establish the connection. You can select one of the WPS method or the Standard way of connecting. If, however, your printer isn’t compatible using wireless connections, then you could utilize the ethernet option to establish the connection.
Next step accessing the file you downloaded. If you did not change the file’s location by hand the downloads file within the folder Downloads. Double-click the file to start it.
Once you have granted the permission, you’ll be able to view the wizard to install.
The first window allows the ability to modify the settings using the wizard’s language. Make the necessary changes before moving on through the steps.
You’ll now be required to create the connecting your PC and your printer. Select the most suitable option from the options that are available and then create an internet connection. Instructions to do this will be displayed on the screen.
If your printer is attached to the system When it is connected successfully, you will receive the list of printers. You must select the one that you are using.
On the screen for selecting software Make sure to check the boxes of the program you want to use.
After that after that, you will see the agreement to license be displayed you with a screen. Go through these terms in detail and then agree to them before moving further.
The installation is now in progress. Within a few minutes it will be completed.
You are now able to take the print test following the steps and completing your ij.start.cannon setup of the driver.

How to Establish a WIFI Connection on Canon Printer?

Your printer needs to be connected to the internet ahead of connecting to http//canon.com/ijsetup . To do this, you need to follow the instructions in the following steps:

Wireless LAN Setup

Switch on the printer to start the setup process. Press the power button. The light on the Power LED of the printer needs to remain steady and green.
Click the menu button of the printer, following which, the Network Settings will be shown on the screen.
For creating connections, there are many options. It is necessary to choose one of the Wireless LAN Settings options out of the other options. A pop-up will be displayed on the printer’s screen which you must click “OK.
Select the Access Point by selecting an SSID settings option. Select the network you prefer and then enter the WiFi protection passcode without making any mistakes.
Keep going until the printer’s screen doesn’t appear Connected. Then hit the OK.

Detailed Guide on How to Connect Epson Printer to Wifi

Epson printers are one of the best available printers for commercial as well as official establishments. Due to the positive feedback from the users, it has also earned reliability in the market with passing time. To get excellent quality prints, users can completely trust on the Epson printers. With the help of these printers users can complete their task quickly as it allows the user to print on different paper sizes and types without manual switching.

The wireless network is a stress-free network as you won’t have to take worry about power cables and network failure. Here, we will provide you the proper steps to connect your Epson Printer with wireless network. But first, look at the other requirements which you are needed before making connection.

To setup an Epson wireless printer, you need:

Wireless router
Login credentials like password and SSID. The SSID is the name of the network in which you are connected to.

How to Connect Epson Printer To Wifi – To ensure that your Epson printer is configured with a wireless network or Ethernet connection, you need to go after the instructions mentioned below.

Steps to connect your Epson printer a Wi-Fi network:

Open Epson Printer software Wizard in your computer
Go to the Main window of the Epson support and choose the printer model.
Open manual section and then hit the start button to begin the procedure.
Download and install the connection printer set-up utility of your related Epson printer.
License agreement windows will pop-up, simply click on the checkbox that says end-user license agreement.
After that, click on the next option for further process
Press install tab and wait for few minutes until installation gets finish
When the installation is complete simply click on Finish.
Under the dialog box menu, choose the printer that you installed and then press next
Select the printer registration option and click on next.
Tap on the agree option and next.
A new dialog box will pop-up on your computer screen that says, Register a printer to Epson connect, After that press OK.

With the above steps, you can easily connect your Epson printer to your Wi-Fi router or wireless network.

What is Epson Printer is in An Error State how to fix this Error

Have you ever encountered an error state on your Epson printer while printing through it? If not, then we want to let you know that sometimes, printer users get this error message on their computer system’s screen. It states that your Epson printer is in Error State problem. It is a common problem; one might witness owing to the issues in the hardware of the printer and software upgrades. Today we will tell you about how you can solve the Epson printer error state issue for error-free printing through the steps mentioned below.

Causes of Error State on your Epson Printer

Here is a list of the reasons behind the Epson printer in error state problem :

Epson printer error stateConnectivity problems between computer and printer

Sometimes, Epson printer users encounter connectivity problems due to weak internet connectivity. For example, if you have not placed your printer in the wi-fi network’s signal range or if any object is blocking the internet signals from reaching to the printer might be the cause of weak wifi connectivity & error state issue on Epson printers.

Problems in printer software installation

Sometimes, When the software or drivers of your Epson printer are not installed properly. Then, It starts to give you the Error state issue.

The printer is not receiving the desired power supply.

On the other hand, many times your Epson printer does not receive a sufficient or proper power supply from the power source. That is why it starts to give you the printer in an error state issue.

Corrupt printer drivers

Drivers are the set of software that make your Epson printer work & print. You have to regularly update them to their latest version for the smooth functioning of your Epson printer. If you don’t update your printer drivers, they get corrupt and stop working. On the other hand, virus infection and third party applications also corrupt your printer drivers and your Epson printer reaches the error state.

Fixing Epson Printer Error state issue?

Various software, hardware issues could be responsible for the error state issue on your Epson printer. This issue also occurs due to the presence of obsolete printing errors. If you are looking for some ideal solutions to the problem, you should make sure to follow the below-mentioned steps:

Fix hardware problems

If you are looking for an ideal option to say bye to the hardware issues on your Epson printer device, then, you should follow the below-mentioned steps:

In the first step, you should make sure that your printer’s power cord is appropriately connected to the power source.
Now, check if the USB cable has been attached to the printer correctly. If you notice any specific cable connection problem, then, connect any other USB cable to your printer.
If you have a wifi printer, then, you have to make sure that your Epson printer has been appropriately connected to the wireless network.
Now, try to print a blank page to check if the issue has been resolved.

Check the connectivity of your printer

Error state issue on epson printer

It is important to check the connectivity of your Epson printer to fix the error state issue. Always make sure that the connection between your computer and the Epson printer is functioning properly. For doing this, we recommend you to use a separate USB port to check whether the devices are correctly connected. Here is a list of the steps you need to follow to fix the issue:

In the beginning, you need to turn off the printer and look for the paper jam.
Now, you have to close all the trays properly.
As you come across the paper jam issue, you should make sure to clear the same slowly.
Now, check if there is a low link on the printer. If you find low ink on your Epson printer, then, refill it.
In this step, Switch the printer’s WiFi network and try to connect it with the other wifi network to check if it solves the Epson printer error state issue.

Check jammed papers in the printer

At times, you might find that the Epson printer is in an error state due to jammed papers. In this case, it is recommended to disassemble the computer to clean the jammed documents. To resolve this, you should make sure to use a cloth piece and a brush, after which you should wipe it. This problem helps remove all the papers from the system. Once the cleaning is completed, you should incorporate the papers for printing into the printing tray, after which you should try to take a print.

Use the Windows Troubleshooter

You can use a troubleshooter to fix the Epson printer error problem.

Search for the “Devices and Printers” section from your computer’s start menu.
There, You will see all the devices connected to your computer, according to their categories.
Search for your Epson printer.
Now, right-click on your Epson printer device icon.
In the drop-down menu, you will see the “Troubleshoot” option.
Click on the “Troubleshoot” option to find & troubleshoot your Epson printer and its related issues.

Install your Epson printer properly

The windows computer identifies the printer device automatically. Always press on the “Continue” option to start the Epson printer installation process. After that, you will have to follow the instructions on your computer screen start and complete your Epson printer installation & solve the Error state issue on your Epson printer.

Reboot the computer & printer

In the beginning, you have to stop all the printing tasks that are currently active.
After that, you have to shut down your computer & Epson printer.
Next to this, You have to power on your Epson printer & computer. Most of the time, restarting the printing machines and computer removes all the errors from your printer.

Update the drivers of your Epson printer

If you have not been capable of getting rid of the error state problem until now, then, you should update its drivers. You can download or update your Epson printer drivers by visiting the official website of Epson.

The Solutions given above will surely fix the Epson printer is in an error state problem for you.