agosto 2022 - Technology Information

Why My Canon MX920 Printer Not Responding Fix the Issue

There are various reasons why your printer is not working. These problems can be caused by incorrect wire connections, driver issues, or network problems. Before trying out the following fixes, make sure that your printer is turned on and properly connected to your Mac. To narrow down some hardware issues that may require hardware fixes, do these preliminary checks before moving on to specific problems listed in this guide to fix Canon mx920 printer not responding on mac

Things To Do When Canon printer is not working on Mac

The Mac may not recognize the Canon printer if you installed the incorrect driver for your printer model. On the other hand, if your Canon printer suddenly gives you error messages or stops working, it’s probably time to update its driver.

If your Canon printer’s driver is up-to-date, but you still keep receiving printing errors on your Mac, try resetting the Mac printing system.

Update Canon Driver

Canon printers and scanners

Go to Apple Logo > System Preferences, then select Printers & Scanners.
On the left panel of the window, press and hold the Control button and select your printer.
A popup menu will appear and select Reset Printing System.
A confirmation popup message will appear and select Reset.
Once you have reset the printing system, re-add your printer by clicking on the “+” button on the bottom of the right panel.
A popup menu will appear and if the name of your printer appears under Nearby Printers, you can select it to re-add it to your list of active printers. Otherwise, click on Add Printer or Scanner.
Ensure that your printer is connected to your Mac for your printer to appear on the list of available printers. Once you see your printer, select it on the list and click on Add button on the lower right of the screen.

Restart your Mac and Canon printer

To rule out the obvious, restarting your devices is the safest best in doing preliminary troubleshooting.

This clears every possibility of other conflicting application processes that might be interfering with the communication between your Mac and your printer. Once you have restarted both of your devices, check again if you can proceed with your printing tasks.

Check the status of your internet connection

If your Canon printer is having difficulties printing through Wi-Fi, ensure that you have a strong Wi-Fi signal on your Mac and printer.

If your printer has a weak signal, move it closer to your wireless router to reduce lag and ensure that your printer has a strong internet connection. Sometimes, a slow internet connection may cause task processes to time out, resulting in printing errors.

Disconnect from your VPN

If you are connected to the internet via a VPN connection, you may receive error messages. Your VPN may be blocking your connection with your printer or vice versa. Try disconnecting from the VPN and try to print again and see if it works.

Check your printing queue

A pooling print queue may cause your printer to become unresponsive and appear offline.

Some print tasks may have paused due to application timeout, or the printer did not respond within a certain period of time. Having a print task paused on top of a print queue may cause other pending print tasks to accumulate and block your print queue.

To fix this:

Go to Apple logo > System Preferences > Printers & Scanners.
Select your printer on the left panel of the window and select Open Print Queue.
A window will appear that shows all your printing tasks. Check the status of each print queue and close every single one of them.
Restart your print tasks.

Check if your printer is connected to your network

If you are using a Canon printer that supports wireless printing, you might be encountering printing errors because it’s not correctly connected to your wireless network. Your Mac may not recognize your printer over the internet if its settings are not properly configured.

Before proceeding with this workaround, make sure first to have the correct driver of your Canon printer model installed on your Mac. This is necessary because your Mac needs to detect your printer before successfully adding it via IP.

To solve this issue:

Go to Apple logo > System Preferences > Printers & Scanners
Click the Add “+” button.
Select the IP tab on top of the
Enter your IP address on the “Address” field and wait until the text under the field says “Valid and complete hostname or address.”
Click the Add button on the lower-right corner of the window to add the printer.
Print a test page to confirm that the printer is working correctly.

Canon Printer Problems on macOS Big Sur

The most likely causes of printer errors are caused by driver incompatibility with the macOS Big Sur. Some older printers may not work with updated Macs because printer manufacturers are yet to update their printer drivers with support for macOS Big Sur.

How to install Canon printer with Big Sur

Update your printer driver

If you are using an old printer and have just upgraded your Mac to Big Sur, check Canon’s support page if your printer has an updated driver supporting Big Sur. You can also type in your Canon printer model and check for a Big Sur compatible driver update. If Big Sur is not on the list of operating systems under Drivers and downloads, that particular model does not offer support for macOS Big Sur.

Download Gutenprint for Mac

Gutenprint is a free software that provides support for unsupported printers in Mac OS X. If you have an unsupported printer for Big Sur, you can most likely fix this issue by installing Gutenprint for your Mac. This works for the unsupported Canon PIXMA Series in Big Sur.

To do this:

Download the latest version of Gutenprint
Once the download is finished, double-click the downloaded .dmg file to open it.
Double-click on the gutenprint .pkg file and follow the on-screen instructions. You may have to enable admin rights by typing your login credentials to proceed.
Once installation is complete, go to Apple logo > System Preferences > Printers & Scanners.
Make sure that your printer is connected to your Mac. Then, click Add “+” on the lower right under the right panel to add your printer.
Once your printer shows on the list, select it and click on Select software beside the Use drop-down list.
On the search bar of the popup window, type the model of your Canon printer (e.g., G3000) and select your correct printer model on the result list (e.g., Canon PIXMA G3000 + CUPS + Gutenprint) and click OK.
Click Add on the add printer
Wait for the installation process to finish and do a test print to see if it works.

How to Use IJ.Start.Canon to Setup Inkjet Printer on Windows

Canon ij printer is a complete solution for multiple works that you can easily learn to set up from ij.start.canon and get a better experience. This is the official online support site that provides you Canon products’ online manuals, function information, and more.

Download and Install Canon ij Setup

Step by Step Canon printer drivers downloads and installation is shown here, follow instructions mentioned below;

Ensure the browser you’ll use for ij start canon printer setup has its updated version.
Go through ij.start.canon (secure) site and click the “Set Up (Start Here)” tab.
Move ahead to the next page, where you need to enter the Canon printer model.
You also can choose the first two letters of your Canon ij printer from shown list on ij.start.canon screen.
Click “Start”. See, change or select the right operating system like Windows, Mac, from the corner of your canon
Eventually, choose an appropriate canon ij setup and download canon drivers on your system.
After software download from https: //ij.start.canon, open the downloads folder, and double-click on the setup file to install the Canon printer software.
Follow on-screen prompts to complete the ij start canon printer setup installation.

Setup ij.start.canon with USB

In case you cannot locate your Canon printer after reaching the official sites or other then you can use the USB for setting up the canon printer setup. You can also visit the ij.start.canon for taking the help. Well, here are the steps you need to follow to setup canon printers using USB:

First of all, you need to make sure that you have a USB cable. From the web browser and go to the ij.start.canon website.
The next step is to wait for the Canon software to connect the printer to the PC with a USB cable.
Click on the “Next” button and get the driver for your printer and check whether you want to connect the printer to one network.
Tap on the “Yes” and hit on the “Complete” button and then tap on the “Add a printer” option.
You have to click on the “Add” button and get the driver from the ij.start.canon site.
Go to the Device setting and then tap on the LAN settings and choose the connection.
Install the Canon drivers, inkjet cartridges, and then check the connection for your device. You can configure the canon printer and try to print.

Print with ij.start.canon on Windows 10

The first step is to check whether the Canon printer is turned on. Just load the paper of the appropriate size in the input tray after extending it.
Open the Printer Driver setup window on your system. Select the profile that you use frequently.
Just choose the Quick setup tab from the Commonly used settings option.
On choosing the printing profile of https//ij.start.canon setup, the Additional features, Media Type, and paper size values to their original values.
The print quality should be set to High, Standard, or Draft based on your need. Tap on the “OK” option to save the settings.
Open the document that you want to print by using the Canon printer and go to the “File” tab. Just select the Print option to print your documents.

How to Setup Linksys Extender RE7000 Using These Method

The Linksys RE7000 wifi extender comes with a quick and efficient setup process. Linksys RE7000 extender setup can be done in two ways: through the access point mode and the range extender mode. Go through this post to learn How to setup linksys extender re7000

Linksys Extender Setup using extender.linksys.com

First of all, plug in the extender to an electrical outlet.
Switch on the power button and wait for the power LED on the extender to turn orange.
Now, use a computer system or any other device and connect to the Linksys extender setup-xxx network.
Open a browser on the connected PC and type extender.linksys.com in the address field. Press the enter tab on the keyboard.
If the default web address doesn’t work, you can try the default IP (https://192.168.1.1)to open the Linksys extender login page.
When a login screen appears, enter the admin username and password of your range extender. Press the login button.
You can find the default login credentials on a printed label on the extender’s back panel.
Once logged in, click on the Start Setup option from the basic web-dashboard.
Now, choose the option ‘Set up as a Range Extender’ and then click on Next.
Then, scan for the available networks and choose your existing network name from the list.
Enter the wireless password to connect to this network.
Now, you need to create the Wi-Fi name and password for your extended network.
Once done, click on the Save tab to apply the changes.
You can now place your Linksys RE7000 extender at your desired place. Use the Spot Finder function to determine the signal strength between your extender and the router.
Afterwards, you would be asked to update your extender firmware to its latest version.

Extender Linksys Setup – Prerequisites

Linksys WiFi range extender repeats the wireless signal of any router or access point and provides internet connectivity in hard-to-reach places. In order to perform Linksys range extender setup manually, here’s a list of essentials:

The extender must be turned on.
Note down the existing router’s wireless settings i.e. SSID or wireless network name, wireless password or network/security key, and wireless channel.
Restore the factory settings on your WiFi range extender.

So these were some necessary things to keep in mind before setting up a WiFi extender. Now, let’s get to know how to set up a Linksys range extender. There are two methods for Linksys range extender setup: manual and WPS. Both methods are described below in detail. You can go with any method which you find easy.

1. Linksys Extender Setup – Manual Method

Setting up Linksys extender manually? Here are the steps you need to follow:

Bring the computer or laptop and range extender to the same room.
Now, plug the range extender and computer into an electrical outlet.
Type extender.linksys.com in the URL bar of a web browser.
A login page will come into view. Enter the credentials to log in.

2. Linksys WiFi Extender Setup – WPS Method

WiFi Protected Setup (WPS) is a security standard for a wireless network that is very helpful in making steady connections between the extender and wireless devices. There are two ways for setting up WiFi extender using WPS. You can either use the physical WPS button on the extender or log in to the web-based extender.linksys.setup page and choose one of three given options.

(a) Using WPS Button

Just follow the below-given instructions for Linksys range extender setup using the WPS button:

Linksys Range Extender

Insert the range extender into a power/electrical outlet.
Hold the WPS button on your extender.

It indicates that the WiFi extender setup is successfully done or completed.

Note: If you own a dual-band Linksys extender, apply the same steps once again.

(b) Using the Web-Based WPS Button

It provides you with three options, namely: WPS button, using the WPS PIN, and using the router’s PIN.

1. WPS Button

Log in to your Linksys wireless range extender and click on the Wireless > WPS button. After that, press the WPS button on your device to get started with the WiFi Setup process. After that, click on the Enable option next to the WPS button.

2. Using the WPS PIN

On the off chance that your device includes a WPS PIN, input that number in the second field on the extender setup web-based page. That’s it!

3. Using the Router’s PIN

In case your client device demands the router’s PIN, input that number in the third field on the extender.linksys.setup page or Linksys wifi extender setup website

Once the WPS light stays continuously lit, it means the WiFi extender setup has been completed.

Linksys smart wifi setup On the off chance that you come across any issue while setting up extender, reset the extender to factory settings and try again.

Check WiFi Connectivity After Extender Linksys Setup

As soon as you are done with the extender Linksys setup, you can check the WiFi connectivity using the Ping Command. Once done, here are the steps to check the network connectivity status of your Linksys range extender:

Open the Command Prompt on your system.
Now, enter the IP address of your Linksys range extender and press the Enter key.
In case it indicates data transmissions, it means your Linksys WiFi extender setup is successful.
On the other hand, if it shows ‘no data transmissions’ or ‘disconnected’, chances are that the firmware of your extender is outdated. In such a case, update your Linksys extender’s firmware to the most recent version.

The extended network of your WiFi extender will be Linksys extender setup-xxx. So, by following the above-mentioned steps, you can check whether the extended network is working up to the mark or not

How to Fix Canon Printer Not Printing Black: Effective Tips

With each and every technical product, it’s not a big deal to face some major or minor issues and the same goes with the Canon Printer. Canon Printers often report why is my canon printer not printing or why is my canon printer not printing color. Are you also encountering the same problem with your canon printer? If yes, then there is nothing to worry about as we are here to resolve all your concerns and queries related to the Canon Printer Problems in just a few clicks of the button. So, let’s get started without wasting even a single minute. Make sure that you read this post till the very end to effectively resolve your canon printer not printing black color properly!

Methods to Fix “printer is not printing correctly” Canon Printer Problem:

This issue “why is my canon printer not printing” can be occurring due to any of the reasons and conditions

Solution 1: Set Canon Printer as Your Default Printer on your Device

Here is the step by step guide that you need to follow till the very end to make sure that you are not left with why is my canon printer not printing the right colors issue. So, let’s start!

Step 1: Navigate to the Control Panel of your device as clearly visible in the below given image.

Step 2: Now, press the “Devices and Printers” option available on your computer screen.

Step 3: In the list of available printers, you need to ensure that you are putting Canon Printer as your default printer.

Step 4: If you find that the Canon Printer is not set there as the Default Printer, then right click on the Canon Printer option and select the “Set as Default” option to set canon printer as your default printer.

Step 5: Even after setting the Canon Printer on your device as the default printer, you need to make sure that your canon printer is marked with a Green Tick.

Solution 2: Change your Printer Status from Offline to Online

It is also possible that your canon printer won’t print color because your printer status is offline instead of online. So, let’s take a look at how you can change your printer status from offline to online!

Step 1: Type Control Panel in the windows search option.

Step 2: Navigate to the Control Panel window to check out the list.

Step 3: From the list, click on the “Devices and Printers” option.

Step 4: Locate yourPrinter type from the printer catalog appearing on your device and then right click to choose the ‘See what’s printing’ option.

Step 6: Here, you need to check that your printer is not selected with the offline option and if you find a tick sign on the offline option, then uncheck to go online.

Solution 3: Remove Printing Tasks Set in Printing Queue

There is a high chance that you are facing this issue because the printing task that you queued is stuck in between and is now creating trouble and that’s why you are facing canon printer not printing issue. So, follow the listed below steps to successfully remove the printing tasks set in the printing queue.

Step 1: Navigate to the Windows Search Option of your device and input control panel.

Step 2: Input services.msc in the field and hit the Enter button on your keyboard.

Step 3: Go to the Services window, scroll down and find the Print Spooler and click on ‘Stop’ after right clicking on it.

Step 4: Open the Run Box once the Print spooler service is stopped on your device.

Step 5: Input Spool in the field and hit the enter key.

Step 6: Open the Printer folder of your device.

Step 7: Delete or Remove all files from this folder.

Step 8: After deleting all the files, close the spool folder.

Step 9: Now, go back to service windows and right-click the print spooler program and click on the ‘Start’ option.

Step 10: Now, try to print with your canon printer to check if the issue got resolved or not.

Solution 4: Update the Printer Driver with the latest version

It is also possible that your printer is facing canon printer not printing black properly due to an outdated printer driver in your canon printer. So, we will advise you to update your printer driver with the latest version to resolve this issue and then check if the issue got resolved or not. If not, then depending on the situation, we have more solutions for you

Solution 5: Disable the Firewall Protection Temporarily on your Device

There are chances that the firewall protection on your device is acting as an obstacle to deliver printing service properly. So, you are advised to temporarily disable the firewall protection on your device. Follow the listed below steps to do so!

Step 1: Go to the Search Bar and type ‘Windows Defender Firewall’ and click the enter key.

Step 2: Click on ‘Turn Windows Defender Firewall on or off’ option to disable the firewall protection.

Step 3: On both public and private networks, disable the firewall.

Step 4: Click Ok to save the changes that you have made in Firewall.

Solution 6: Check the Status of Print Spooler

Step 1: On the Run Box Window, input the Control Panel.

Step 2: Input “services.msc” and click Enter Key.

Step 3: Scroll down to the bottom to find the printer spooler option and then click on properties option.

Step 4: From the top, click on the General Tab. Navigate to the Service Status and click Stop and then OK.

Step 5: Change the Startup type to Automatic and then click OK to save the changes.

Step 6: Click Start and then OK.

Step 7: Restart Your Printer and now check for the status of printing.

How to Download Canon Printer Driver Easy Steps

It’s one of the most used methods to download the Canon printer driver. These drivers from the official site are mostly correct if you choose the right model number. See below to start the download and installation process;

Go to the Canon support site in your system browser.
A search box appears at the top. Make sure you know your printer model number. Otherwise, check the top or front, or side to find the Canon model name number.
Enter the model name in the search box. I.e., mx922. Then, click on your model below when it appears.

The Drivers & Downloads page is next for the model you have searched.
Select the Canon USA drivers or the Software depending on your requirement.
Make sure your system is up to date and fulfilling the requirements. Also, choose your operating system, i.e., Windows PC.
Navigate to the right side of the driver setup and click on the Select button. It’ll show you the different options.
Click Download. It’ll save the file to a
Wait for it to download the driver files. Then, go to the folder location where you saved the Canon printer driver setup and double-click on the setup.exe file.
Click Start setup to begin the installation using this Canon Printer Installer.
Read and accept the license agreement.
Choose a connection mode from the shown window, then follow on-screen instructions to finish the Canon USA drivers.

Once the printer drivers are installed, connect your Canon printer to your system using the USB or wireless connection.