If you have purchased a wireless Brother Printer, then the printer setup would slightly be different from the USB setup. So, if you have been hunting for a way to connect Brother Printer to wifi, then you have landed at the right place. This write-up will take you down the lane of Brother printer wifi setup in Windows and Mac. In continuation to that, we shall discuss some frequently asked questions to make you understand everything in a better way.
Steps to connect brother printer to Windows 10 computer
Complete these steps in the same order as written below to connect Brother Printer to wifi on Windows 10:
- From any web browser, go to https://www.brother-usa.com/brother-support/driver-downloads
- Choose brother printer model and choose the operating system.
- Download the driver for your Brother machine and double-click on the .exe file.
- Once done with that, go to the control panel of your printer.
- Open the printer menu on your screen.
- Navigate to the ‘Network’ section and choose ‘WLAN.’
- Select ‘Setup wizard’ and hit the ‘Enter’ key when you see the wireless icon on your display.
- From the appeared results, choose your network.
- Enter the correct password for the same wireless network.
- Your printer will now be connected successfully.
Use these steps if you want to connect brother printer to laptop wirelessly.
Connect wireless brother printer to Mac PC
For Brother Printer wireless setup on Mac, just follow the instructions as given below:
- At first, install the Brother Printer driver from the support page.
- Next, double-tap on the downloaded file.
- Then, open the ‘Utilities’ folder.
- Choose ‘Wireless Device Setup Wizard.’
- Then, double-click on the file named ‘Wireless Device Setup Wizard.app.’
- Now, follow some easy instructions to complete the setup.
- Choose the desired wireless network and enter its password.
- Make sure you select the correct network SSID.
- The wireless connection would now be established.
Connect using Wi-Fi Direct
- Find out and note down the wireless settings of your Brother machine
- Using the USB cable, connect your printer and the computer.
- Now, run the printer setting tool.
- Turn on the Wireless Direct by going to the Wireless LAN tab.
- Locate, press, and hold the Wi-Fi button on your printer.
- Wait for a minute and see if the light is flickering or not.
- Now, choose your network SSID and enter its password.
- If you see a Blue light, your connection was successful.
Fix Brother Printer Driver Installation Problems
Learn to Setup Brother Printer Machine to Wireless Networkultima modifica: 2022-12-16T08:18:09+01:00da