Setting up your Brother printer to a Wi-Fi network can be a bit tricky, but with the right steps, it can be a breeze. In this article, we will guide you through the process of setting up Brother printer wifi setup
Step 1: Check Your Network Requirements
Before starting the setup process, make sure that you have the following requirements:
- A Wi-Fi router
- Network name (SSID) and password
- A computer, tablet or mobile device that is connected to the Wi-Fi network
Step 2: Connect Your Brother Printer to Power
Make sure your Brother printer is plugged into a power source and turned on.
Step 3: Connect Your Brother Printer to the Wi-Fi Network
There are two ways to connect your Brother printer to the Wi-Fi network: using WPS or the control panel.
Using WPS:
- Press the WPS button on your router and then on your Brother printer within two minutes.
- Your Brother printer will start connecting to the Wi-Fi network. This may take a few minutes.
Using the Control Panel:
- Press the Menu button on your Brother printer’s control panel.
- Use the arrow keys to select Network and press OK.
- Select WLAN and press OK.
- Select Setup Wizard and press OK.
- Your Brother printer will start searching for available Wi-Fi networks. Select your network from the list and press OK.
- Enter your network password and press OK.
- Your Brother printer will start connecting to the Wi-Fi network. This may take a few minutes.
Step 4: Install Brother Printer Software
After connecting your Brother printer to the Wi-Fi network, you need to install the printer software on your computer or device. You can download the software from the Brother website or use the installation CD that came with your printer.
Step 5: Add Your Brother Printer to Your Computer or Device
Once the software is installed, you need to add your Brother printer to your computer or device. Follow these steps:
- On Windows: Go to Settings > Devices > Printers & scanners > Add a printer or scanner. Select your Brother printer from the list and follow the prompts to finish the setup.
- On Mac: Go to System Preferences > Printers & Scanners > +. Select your Brother printer from the list and follow the prompts to finish the setup.
In conclusion, setting up your Brother printer to a Wi-Fi network requires a few steps, but it’s a simple process that you can do on your own. Make sure you have all the necessary requirements, connect your printer to the Wi-Fi network, install the printer software, and add your printer to your computer or device. By following these steps, you’ll be able to use your Brother printer wirelessly and conveniently.
How to Reset a Brother Printer to Factory Settings
If you are experiencing issues with your Brother printer, resetting it to its factory settings can often resolve the problem. Resetting your printer to its factory settings erases all stored settings, including network settings, and returns it to its original state. In this article, we will guide you through the process of resetting your Brother printer to its factory settings.
Step 1: Turn Off Your Brother Printer
Make sure your Brother printer is turned off.
Step 2: Access Maintenance Mode
Press and hold the Go button on the front of the printer as you turn it on. Keep holding the Go button until the Ready LED turns off and then back on. Release the Go button and press it six times quickly. The printer should enter maintenance mode.
Step 3: Reset the Printer
In maintenance mode, use the arrow keys to navigate to “Reset” and press the OK button. Then, use the arrow keys to navigate to “Factory Reset” and press the OK button again. Finally, select “Yes” to confirm that you want to reset the printer.
Step 4: Exit Maintenance Mode
After the printer has reset to its factory settings, it will automatically exit maintenance mode. If it does not, turn off the printer and then turn it back on again.
Step 5: Set Up Your Printer
Once your printer has been reset to its factory settings, you will need to set it up again. This includes connecting it to your network, installing any necessary drivers and software, and configuring any other settings you may need.
How to reset brother printer to factory settings is a simple process that can often resolve issues you may be experiencing with your printer. By following these steps, you can reset your printer to its original state and start fresh with a clean slate.