Tag: netgear ac750 wifi range extender setup

How To Perform Netgear ac750 Wifi Range Extender Setup

Netgear AC750 is the series of wifi range extenders which comes with the simultaneous dual band 2.4Ghz and 5Ghz technology. It can deliver the max speed upto 750Mbps which leads to reduce the interference in your network.It comes with two wifi modes and two antennas for better wifi network coverage. After you perform Netgear AC750 Setup you will be able to use your extender in two different modes.You can use it to extend your existing network and you can also use it to create a new Access point as well. Let’s go with the Netgear ac750 wifi range extender setup process.

For Netgear AC750 Setup follow the instructions given below:

  1. Power on your Netgear AC750 EX3700 extender.
  2. Place it closer to the home router.
  3. Wait until the power LED on your AC750 turns solid green.
  4. Now you need to grab any mobile device.
  5. Connect your wifi enabled device to the existing network.
  6. Open a web browser and visit www.mywifiext.net.
  7. Go to the New Extender Setup.
  8. Follow the on screen prompts to finish the setup process.
  9. Once it is done,unplug the booster and plug it between the dead zone and your wifi router.

Let’s get introduced with another way to setup your Netgear AC750 i.e the Wireless protected setup (WPS) which is considered as the quickest procedure to configure your repeater. Netgear AC750 WPS Setup will not take more than 2-4 minutes to be performed. Let’s see how this setup is supposed to be done.

Here are the steps to do Netgear AC750 WPS Setup:

  1. Power on your Netgear AC750.
  2. Position it near to the existing router.
  3. Wait until the power LED on your AC750 gives solid green light.
  4. Press the WPS button on the booster.
  5. Also press the WPS button on the main router after a minute.
  6. When your booster gives three solid green lights,which means that you have finished the setup process.
  7. Now it’s time to unplug your AC750 and place it at the location having dead spots.

That’s how you can install your Netgear EX3700 setup on login page of mywifiext.net within two minutes only without entering any personal information like passphrase,username and SSID.In the next blog we will talk about the procedure to update the firmware on your extender.

For Netgear AC750 firmware update go through the steps given below:

  1. Firstly turn on your Netgear AC750 by plugging into a power socket.
  2. Place your repeater and existing router close to each other.
  3. Open any web browser and go to www.mywifiext.net.
  4. Type your username,passphrase and SSID to login.
  5. Hit on settings option and then on firmware upgrade.
  6. During the update process do not unplug your AC750.

By following these steps you will be able to update the latest version of firmware on your Netgear AC750

Netgear WiFi Extender Setup Using Netgear Installation Assistant

You can easily perform Netgear range extender setup using the installation assistant. Here’s how to setup Netgear WiFi extender via the installation wizard:

  1. Plug the extender into an electrical outlet.
  2. Connect your router to the extender.
  3. Launch a web browser.
  4. Enter http://192.168.1.250 in the address field of the browser.
    The Netgear extender setup wizard displays.
  5. Click the NEW EXTENDER SETUP button.
    netgear extender setup
  6. Complete the fields on the setup page and click the NEXT button.
  7. If you do not want to extend both WiFi bands, clear the 2.4 GHz WiFi Networks or the 5 GHz WiFi Networks checkbox.
  8. Click the CONTINUE button.
  9. Click the NEXT button.
    The registration page displays.
  10. Complete the registration fields and click the FINISH button to complete the Netgear WiFi extender setup.

That’s how to setup Netgear extender using the installation assistant.

Netgear Extender Setup: WPS Method

In case you find the manual method of Netgear extender setup quite tricky for you, we have got you covered! Use the WPS setup method to perform Netgear WiFi range extender setup with ease. Here’s how to setup Netgear extender using the WPS method:

  1. Power on your range extender.
  2. Press the WPS button on your extender.
  3. After that, press the WPS button present on your home WiFi router.
  4. The WPS LED will glow on your extender, showing that the extender has configured the router’s signals properly.
  5. In case you own a dual-band WiFi extender, repeat the steps for the 5 GHz band.

Done! Netgear wifi extender setup instructions has been completed. If you come across any issue during the Netgear range extender setup process, chat with us anytime.