Windows 10 Archivi - Computer software solution

How to Fix Driver Power State Failure on Windows 10?

There are many reasons behind BSOD errors and they can occur due to the Unmatchable hardware, wrong drivers, or improper settings of power. If you are facing the driver power state failure BDOS error on your PC, then here are the instructions to fix the issue.

Drive power

Delete External Hardware

Firstly, attach the external hardware to the system. If you would like to check the core problem, attempt detaching the peripherals like scanner, speaker, USB drive or printer, etc. After that, reboot the system. In case the system works properly after disconnecting external hardware, then it means one of them causing the problem. In that case, you have to install all the drivers again into the system and check them individually.

Uninstall the Doubtful Driver

First of all, you should try to boot into the Safe Mode otherwise boot normally.
After that, hold the Windows and R button altogether over the keyboard to invoke the Run section.
Then input ‘devmgmt.msc’ into it and select the OK button.
You should extend the category then locate the yellow color exclamation sign device.
Reach the device, and right-click on it, then choose the Uninstall device.
Now, restart the system and look at whether the issue is fixed or not.

Upgrade Device Drivers

You have to boot into the safe mode.
Then reach the Driver Easy website and download it on your system.
After that, you should install it.
Thereafter, launch the Driver Easy then select the Scan Now button.
Now, Driver Easy will scan the system and identify any issue drivers.
Finally, select the Update option beside the graphics driver you require to download the correct driver version and individually install them manually.
Optionally, select the Update All button to download the right version of each driver, which is hiding or outdated on the PC.
Now, restart the system and look to view whether the error is fixed or not.

Disable Power Saving

You should boot into the safe mode.
Hold the Windows and R button altogether over the keyboard to invoke the Run section.
After that, input ‘control panel’ into it and select the OK button to launch the Control Panel screen.
You should click on the Power Options.
Make sure that Balanced (recommended) is chosen, then select the ‘Change plan settings’ beside it.
Go to the ‘Change advanced power settings’ and select it.
Then extend the ‘Wireless Adapter Settings’ and then select the ‘Power Saving Mode.’
After that, modify the settings and set to ‘Maximum Performance.’
You have to expand the ‘PCI Express’ and ‘Link State Power Management.’
Thereafter modify the settings and set to ‘Maximum power savings.’
Later, select the Apply button and then OK.
Now, restart the system to look to view whether the error is solved.

Uninstalling Third-Party Program

Go to the Windows Search on your system.
After that, insert ‘control’ into it and select the OK button to launch the Control Panel.
You should click on the Uninstall a program.
Reach the program, and right-click on it you would like to delete, then choose the Uninstall button.
Now, reboot the system to check whether the error is fixed.

Dyna Bravo is a creative person who has been writing blogs and articles about cybersecurity. She writes about the latest updates regarding McAfee.com/Activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs, and websites.

Source – How to Fix Driver Power State Failure on Windows 10?

How to Create a Transparent Background in Paint on Windows 10

Paint is an image creator or editor application in Windows 10 operating system. Several photographers overlook Microsoft Paint or new Microsoft paint 3D editing application, as they have limited features while compared to Photoshop. However, you can make the background transparent in Microsoft paint 3D with one thing that features available in the application. In this article, we will show you how you can make a transparent background in Paint.

Paint Background

How to remove background color in MS paint in windows 10

Here are two methods that help you make your picture background transparent in Microsoft Paint in Windows 10 operating system. The first way is to include the foreground area and cutting in a picture that results in your picture background becoming transparent. Then you need to paste your foreground mounted on another picture.

The second option include deleting a field in the picture that will make areas transparent that you can fill by attaching another background layer.

1) Hot to attach background transparent to picture in Paint

Here are the steps on how to attach background transparent to picture in Paint:

Launch Paint by tapping the Cortina option and then entering “Paint” in the search field.
Choose Open Paint.
Tap on File and then hit Open and choose a picture to start.
Tap the Select option and then tap on the “Transparent section” option.
Choose the “free-form selection” button in the selection option menu.
Trace near the foreground location to secure from the default picture along with cursor and holding the left button of the mouse.
The rest images behind the picture automatically transparent background.
Here right-tap on the rectangle option that appears near the selection button.
Choose Cut in the context menu to delete the foreground in the picture as snapshot appeared below of the screen.
Now launch all new pictures in Paint.
Tap Ctrl + attach background transparent to picture in Paint key on your keyboard to paste the images that you have traced from the earlier picture.
Now Left-tap the pasted image and then drag it to the position that your wish to mount on the picture.

2) Attach background Transparent in Paint 3D

Here are the steps on how to attach background transparent in Paint 3D:

Type “Paint 3D” in the windows search field, when you have creators updates and add the application into Windows 10 in the web pages.
Choose to launch the Paint 3d application here.
Tap “Menu” and then tap “Open.”
Then hit “Browse file” and choose Paint 3D.
Tap the canvas option that appears in the sidebar.
Tap on “Transparent canvas” settings in the sidebar.
Tap the “Select” option, and then you need to drag the rectangular section move on the area on the picture that you wish to delete.
Tap Ctrl + X button on your keyboard to crop the area that you have selected from the picture, then leave the images in any area transparent background that layer you need to fill.
Tap “menu” and then hit “Save as” and choose the “2D PNG button.
Here you need to enter the file in the search box and then tap the “save” option.
Tap “Menu” and the “New to launch the blank canvas.
Choose “Menu” and then hit “open” and tap then “Browser files.”
Choose to launch a background layer that you have saved recently.
Tap “Menu” and then hit “Insert” and choose to start the transparent picture that you have recently saved.

Source – How to Create a Transparent Background in Paint on Windows 10

How to Fix Citrix Receiver launch error in Windows 10?

Windows has numerous in-built tools to improve its ease-of-use, but there are numerous additional tools you can use alongside the OS. Citrix Reciever is among such tools, but it can malfunction as well. If you are encountering issues while launching the tool, then read through the blog. So, here are the steps to fix the error.

How to Fix Citrix Receiver launch error in Windows 10

Refresh Apps

In case more than one Citrix Receiver apps can’t be opened in Windows 10, refreshing them is arguably the most important thing you can do. Instantly reach the drop-down section on the top left-hand side of the screen. Afterward, select Refresh Apps and view whether the problem continues.

Make Sure Full Permissions for the User Account

Remember that ‘Full Permissions are needed for the user account beneath the ‘HKEY_USERSUSER_SIDSOFTWARECitrix’ on the client machine. That’s the reason we are suggesting to ensure you have full permissions for the account of the user used to sign in to Citrix Receiver for the Registry Key. In case the domain user account doesn’t have permissions, remove the Citrix Receiver key once you take a backup. Then, close Citrix Receiver and open it once again.

Download Available Newest Version

In case you intend to download the available newest version, then you can opt to follow the below-mentioned guidelines.

Go to the taskbar and find the Citrix Receiver button.
When you find it, right-click on it and choose the ‘Advanced Preferences’ option.
Navigate to the ‘About Section,’ take note of the version.
Reach the web browser and navigate to the ‘receiver.citrix.com.’
You should click on the ‘Download for Windows.’
The newest version applicable to the Citrix Workspace application can be there individually.
Then compare the version to this one.
Now, in case the online version is another one, then download the latest version next.

Reset Citrix Receiver

If the users are trying to reset the Citrix Receiver, then they should carefully apply the given steps.

Go to the ‘Receiver button’ in the System tray.
After that, go to the ‘Advanced Preferences’ next.
You should click on the Reset Receiver option.
You will see a pop-up on your screen which asks whether you would like to reset the receiver once again to standard settings,
Then verify by selecting the ‘Yes, reset Receiver’ option.
Once you reset the standard settings, a prompt section should show asking to input in an email ID or URL.
You have to input ‘remote.ptlgateway.net.’ into it.
Citrix Receiver needs you to add the account one more time and input the ‘Domain username and password.
You may be pop-up to sign in twice.
Finally, you may check the checkbox to remember details.

Source – How to Fix Citrix Receiver launch error in Windows 10?

How to Open WordPerfect on Windows 10?

WordPerfect is one of the essential tools for file extensions, therefore numerous users wish to add it to their system. However, if you are facing difficulty in doing so, then quickly obtain a resolve through below written guidelines.

Ms Word

Launch WordPerfect File with MS Word

In case you intend to launch a WordPerfect file with MS Word, then you can opt to follow the below-mentioned guidelines.

First of all, launch the MS Word app on your system.
After that, select the MS key to show all the options of the program.
You should select the Open option.
Now, you require to choose the File option and Open.
Go to the ‘File Type’ menu of drop-menu at the lower side of the section.
Then you have to set this to ‘All Files.’
Reach the search section and search for the file of the WordPerfect file.
Click on it and select the Open option.
In the MS Word, the file will launch once it’s changed automatically.
Navigate to the menu of File and select the ‘Save as’ option.
Ensure to tap Save As Type from the drop-down section, in case of sudden open save screen opening it.
Now, reach the save button and click on it.
In case a window shows alert notification you about modification associated with the format of the fresh file, click on the Yes button.

Change the Name of Extension

If the users are trying to change the name of the extension, then they should carefully apply the given steps.

You should grab the file of WordPerfect and put it on the Desktop.
Thereafter, select the file and right-click on it.
You have to choose the Rename option.
Now, select the file of extension and rename it from .wpd to .doc.
After that, go to the file and twice click on it.
In MS Word, the file should quickly launch it.
Finally, you should either let it in the file type of .doc or change it to the file of .docx type.

Modify the File Associations

In case you intend to modify the file associations, then you can opt to follow the below-mentioned guidelines.

Firstly, get the file and place it on the desktop.
After that, select the file then right-click on it.
You should click on the Open with option.
Go to the option which says ‘Choose default program.’
Then highlight MS Word and put a checkmark beside the option which says ‘Always use the selected program to open this kind of file.’
In case you cannot locate the Word as you want, then select the Browse option to find the ‘Winword.exe.’
Thereafter, go to the OK button and click on it.
The recent .wpdfile will quickly launch in Word.
Finally, you require to twice click to launch them in the MS Word moving ahead.

Source – How to Open WordPerfect on Windows 10?

How to Resolve the Error on Auto-Login in Windows 10

Window 10 was launched with very high expectations, and it passed the majority of them with flying colours. It keeps fixing underlying issues by updates or official blogs focused on resolving the issue. Auto-login is one of the best features that was introduced in the Windows Operating System. As a standard software over time, this feature showed some glitches that hinder user experience.

Windows 10

This issue could be a very frustrating one if you have been using this feature for a long time. This generally appears after the latest update of the Windows and is seen in both of the versions x32 and x64 of the Operating System.

There is no official release of any data to resolve this issue, but there are some tricks that will resolve the problem.

Use of Windows AutoLogOn Tool (version 3.10)

Download and install the tool from the Windows Store.
Run this application as an Administrator; then, you have to provide the information with the appropriate data.
After that Tap on Enable button to start this service.

Note: When the Exchange Activesync Password Restriction feature is active, Windows can not recognize the configuration in auto-login.

Use of Editor of Registry

Launch Run by pressing Windows key+ R.
Enter regedit, and tap on enter.
In the window of Registry Editor Window, you have to reach out to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCurrentVersionWinlogon.
Here you will find the Winlogon Registry Key.
Search here for DefaultUserName and the DefaultPassword.
Now you have to open both strings, then provide the data regarding your User Name and Password (if you are a user of Microsoft account, then you can provide that data too to auto-login).
Open the AutoAdminLogon String by double-click.
Here, set the value to 1, and to save data press OK button.
Now you have to close all windows and reboot the PC.

Use of Command netplwiz

Enter Windows + R key to launch Run.
Enter the netplwiz and click on OK.
Tap on User Tab in the window of User Account.
You have to uncheck the box of Users Must Enter a User Name and Password to Use this Computer.
Now, enter the credential in the section of Automatically Sign In. Click on Ok.
Now Click on the Apply button then to save all the data tap on Ok.
Reboot the Windows 10 PC.

Conclusion

It should be mentioned that these methods are not officially supported by Microsoft (because they didn’t release the fix till now). If you are too possessive to your PC and don’t believe the online data, then you should not use these methods.

Still, these methods don’t change any other essential functions of the PC, so these are much safer methods. If these methods don’t work, you can reach out to the same windows and set every change to default settings.

Source – How to Resolve the Error on Auto-Login in Windows 10

Fix: “Microsoft Store” Error Code “0x80246013” on Windows 10

Microsoft is one of the most popular tech giants across the globe that provides various software and program to make our digital life smoother. Sometimes, some harmful bugs and viruses create hindrances in our tasks. The error code “0x80246013” is the result of these bugs and corrupted system program.

Microsoft Error

This error arises when we try to download an application from “MS Store”, and there are various causes of arising this error issue. One of the relevant cause is attacking the firewall set up on “Windows Defender.” Using various outdated and infected system files and hardware drivers are some of the most identified causes of this error issue.

Here is how to troubleshoot this error issue that shows on our display while installing or updating an application.

Using “Microsoft Store” Troubleshooting Program

There is a built-in troubleshooting program that detects the issues on your device and helps to fix them. Here are the steps on how to use this tool and to fix the issue:

First of all, right-click the “Start” button.
Now, navigate to “Settings” located inside the expanded menu.
After that, tap on “Security and Update” option thereafter expanding “Settings.”
Now, go to the next page and then hit the option “Troubleshoot” located at the left-hand side section and then navigate to your right side section.
Next, look for the option “Windows Store Applications” from the displayed listing and after that, perform a right-click on it.
Then, hit the option “Run the Troubleshooter” after expanding of the page.
Now, wait for a little for the troubleshooter to identify the right cause and fix them.

Resetting “Microsoft Store”

First of all, hit the “Search bar.” Then enter the following command in the space provided:
“cmd.exe.”
Now, tap the “Command Prompt” from the resulting options.
Then, tap the option “Run as Administrator.”
Once the “UAC” expands up, hit the “Yes” tab to provide your consent.
Now, type “WSReset.exe” into the command prompt window followed by the Enter key.
After that, Make sure that no issue is arising on display.

Disabling “Defender Firewall” on Windows 10

Firstly, hit “Window + R” keys simultaneously to launch the “Run” dialogue box.
Now, enter “control panel” into the provided space and then tap “Enter.”
After some time, you will see the listings of items related to the control panel. Now, set the “View by” option to “Small icons.”
Then, hit the option “Windows Defender Firewall.”
Navigate to the left-hand side section and on the following page switch the firewall option to “Off” for deactivating its features.
After that, hit the “OK” tab to proceed.

Note: Re-activate the feature after getting it installed on your system.

Deactivating Third-party Antivirus Software

Go to the “Taskbar” and hit the arrow symbol located inside the notification section to expand the concealed items.
Now, right-click your antivirus app symbol and choose any of the provided options: Shut Down, Disable, and Stop.

Installing Windows Update

Firstly, tap “Windows and I” keys altogether to expand “Settings.”
After that, tap the “Security and Update” option there.
Now, hit the “Windows Update” option from the upcoming page.
Then, navigate towards the right-hand side section and then tap the “Check for Updates” option.
If any update is found, then install it on your device.

Jay Cross is a trained office.com/setup expert who works with the development team with feedback from customers to make it to expectations. He lives in New York and In addition to his work, he also writes for his personal blog.

Source – Fix: “Microsoft Store” Error Code “0x80246013” on Windows 10

Best Laptop Battery Test Software and Diagnostic Tool for Windows 10

The battery in a laptop is essential as it permits the users to prepare the monitor even when it’s not connected to the power source directly. Although the battery’s health does not remain the same always so one should take care of it as well as try to have the handy tool always to check battery health. The web is filled with different types of free tools to check the health of the battery on Windows 10, but it is not easy to know which tool is better. As time passes, you will start noticing that your battery is not properly charging and now it will be obvious for you that the battery life ends. But before you think so, step forward to run some diagnostics. Windows 10 has several latest features, and the Battery Saver Mode is also available. When it is in the active stage, it will protect the battery life by controlling the background activity as well as customizing settings of hardware. It will show the details about the quantity of battery life and the expected time is left. Here is the list of the various best tool that makes things easier for you.

laptop-battery-analyzers

Best Battery Analytic Tools

Here is the list of free battery diagnostic tools:

Vista Battery Saver
Battery Status Monitor
BatteryCare
BatteryCat
Powercfg Tool
BatteryInfoView
BATExpert
Battery Optimizer

BatteryCare

If you need to optimize the activity of the laptop battery with the usage, then BatteryCare is the great option to complete a task. Using the tool, it will inquire users to calibrate battery every time it finishes the particular amount of discharge cycles. As the process completes, the program will memorize last time calibration was made. It will display calibration dates, numbers, and more. For the one who wants to view several data of the battery in one place, then no issues as BatteryCare make the possibility.

PowerCFG Tool

The PowerCFG tool is the in-built feature of the Windows 10, and it is super firm. So you have to execute all the work from the Command line; however, maybe everybody is not involved in working with a tool that requires a graphical user interface. It is friendly to use because it lets users create specific details on the battery. A report is meticulous than what you expect. To create the reports, go to the Command Prompt, then insert the powercfg /battery report and then click Enter.

Now the created reports will be saved to the PC at C:\Users\<username>\battery-report.html.

Battery Optimizer

It is the freeware that may run the advanced diagnostics as well as testing and provides suggestions on how you can utilize the extra use of the battery. It will also inform you about the state and health of the battery.

Battery Status Monitor

It is the battery stage observe and the power managing app. It will show the floating widget on the screen.

Vista Battery Saver

If users are about serious Windows users, then you may want to check the freeware convenience that is it. The small program declares to save 70% of the battery by stopping several Windows features, and it works on Windows 10,8,7.

BATExpert

It is the type of application that helps users to imagine the condition of the battery. It is an easy program that can run on every kind of laptop. It is the free observing tool that enables you to get an idea of the recent stage as well as the facts of the battery.

BatteryCat

it is another type of battery observing or health device of the laptop.

BatteryInfoView

It transfers the collection of data about the battery; however, what it focuses on is the 2 components of it. The first screen will display the details about the Full battery Capacity, Designed Capacity, Number of charge, Battery Health, and discharge cycles along with the other stuff. The second screen will display the details about the event time of charge and discharge with the power stage. Always keep in mind that whenever you continue or suspend the battery, the logline will be created. Moreover, the choice is to export the battery details for further printing or whatever you require it for.

Marshall Lyne is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Source – Best Laptop Battery Test Software and Diagnostic Tool for Windows 10

Fix: Volume Shadow Copy Service Error on Windows 10

“Volume Shadow Copy Service” is popularly known as VSS errors on the Windows system Windows backs up your storage drives and system file snapshots automatically, even if you are using the particular storage or files. VSS is very important for Windows Backup and restoring system utilities. If you are facing any of the VSS errors while performing picture backup or restoring Windows, then it needs to be fixed instantly.

volume-shadow-copy-service-error

Types of Errors

There are two various VSS errors that you may see on your desktop. The error will show as:

“The Volume Shadow Copy Service used by System Restore isn’t responding/working. For various information regarding it, see the event-related log.”

“A VSS failed/ not responded. Please check your “VSS” and “SPP” app event-related logs for various information regarding this.”

You have to follow these methods to troubleshoot the issue:

1. Checking VSS

First of all, you have to check that the VSS is activated. To do so, you have to hit on “Cortana” tab on your Windows Taskbar.
Now, you have to type “services” in the given search bar and then hit the option “Services” to launch the windows.
Now, scroll your page down and then double hit the option “Volume Shadow Copy” to launch your
Now, hit the tab “Automatic” from the available pull-drop menu.
Now, Tap on “Apply” button and then hit “OK.”
After that, you have to restart your system in order to perform the booting process.

2. Junk Folders and Files for “All Drive Partitions”

On Windows 10, you can remove all the junks present on your drive partitions by running a disk clean- up tool.

In case you have more than one drive partitions, then you should scan each of them and detect any unnecessary junks and cache files by various 3rd party cleaning tools.

Here we will guide you to remove junk files from “All Drive Partitions”:

First of all, launch the “Cortana” application.
Now, enter “disk cleanup” in the provided search bar.
Then, you have to hit the “Disk Clean-up” option to launch a new clean up
After that, navigate to the pull-down menu and then choose any of the drive partitions.
After that, tap on “OK.”
Now choose file categories and then mark the checkbox to remove.
Then hit the “OK” tab.
After that, tap on the “Delete Files” option in order to confirm it.

Note: You can also remove system restore points along with various junk containing files.

In case you wish to delete system restore points and junks, then hit the “Clean up system files” option there. It will be inside the “Disk Clean up”
After that, you have to hit the drive partition option there and then tap on “OK.”
Now, choose the “More Options” button.
Then, hit the “Clean up” tab to delete all your system related restore points.

3. Deactivating Windows Firewall

Hit the search bar to activate and then type “Windows Firewall” in the provided bar.
Now, hit the enter key to launch the “Windows Defender Firewall.”
After that, tap on the option “Turn Windows Defender Firewall on or Off” to expand various options.
Next, choose the option “Turn off Windows Defender Firewall” and then tap on “OK.”

4. Turning Off Anti- Virus Software

Deactivating various antivirus utilities, especially related to the third-party software, will also help in troubleshooting your VSS issues.

You have to disable it temporarily by right-clicking on the utility system tray menu. In case you are unable to find it in your antivirus, then expand the program’s primary screen and then choose the disable (Off) option on the page.

These methods will hopefully fix your issue. After that, check that the VSS is working properly. Reboot the system to save all the changes that you have made.

Source – Volume Shadow Copy Service Error on Windows 10

How to Enable or Disable Tamper Protection on Windows 10

Tamper Protection is a real-time security program created to protect the Symantec applications that work on clients and servers. It prevents the Windows 10 security programs to be affected by viruses, Trojans and other threats.

Security is one of the essential aspects of any business or even for the privacy of our information. These days, every operating system provides time to time security updates because cybercrime is on the peak. Windows 10 is one of the most secure and encrypted OS as it has many security features such as Windows Defender, Firewall, Windows Defender Application Guard, Microsoft Bitlocker and Windows Defender Smart Screen. While it is quite secured already but with the security updates, it becomes even more secured via a feature called Tamper Protection.

Many Trojans and third-party infected programs can disable and modify the Windows 10 security features that can lead to unsecured PC. With this, cyber attackers can steal information from your device, but the Tamper Protection can stop them from doing so. It blocks any command from the third-party apps or viruses to disable security software.

If you want to get the most out of your Tamper Protection feature, then you should be aware of how to enable and disable it when needed. In this article, we are going to discuss on just that. Let’s learn to enable and to disable Temper Protection on Windows 10.

Why Turn Off the Temper Protection?

The Tamper Protection can create issues when you want to manage security settings with a different program such as Command Prompt or PowerShell. It can sometimes even prevent some third-party application to work on your computer because it might consider it as a threat for your device. However, turning it off for a while will allow you to run anything on your device.

How to Disable the Temper Protection on Windows 10?

There are a few methods to disable the Temper Protection on Windows 10, and we are listing three ways to do so. You can use any method according to your preferences but read all the instructions carefully before proceeding.

Method 1: Using the Windows Security Settings

Use the default settings to modify the Temper protection settings. See the steps mentioned below to learn how to disable the feature:

Head to the Start Menu.
Now press on the Settings
Head to the “Update & Security” option.
Click on the Windows Security option.
Press on the Virus and Threat protection option
Head to Manage Settings.
Scroll downwards and then find the Tamper Protection feature.
Click on the switch to turn it Off.

Method 2: Disabling Temper Protection by Modifying Registries

See the instructions mentioned here to turn off the feature, by changing the registry settings:

Press Windows + R keys together on your keyboard. This will open the Run dialogue box where you can enter commands to open file directories and programs.
Enter the regedit.exe command and then click on the OK button.
Head to the below path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\Features Edit the TamperProtection option by double-clicking on it.
Now type 0 and press Enter, this will disable the feature.

Method 3: Using Intune to Disable Tamper Protection

If you are familiar with the Intune portal; then use it to turn off the Tamper Protection. Here’s how to do it:

Head to the “Microsoft 365 Device Management Portal.”
Sign in to your account no matter you have a school or work account.
Go to Device configuration.
Head to Profiles.
Now make set the profile settings as mentioned below:
1. Platform:
Windows 10 and later
1. Profile type:
Endpoint protection
After that done, visit Settings.
Click on Windows Defender Security Center.
Tap the Tamper Protection option.
Turn it off.
Now assign this profile to your one or more groups.

By following the above three methods, you can easily disable the temper Protection feature on Windows 10 based computers. If you want to enable the feature again, then see the next tutorial.

How to Enable the Tamper Protection feature on Windows 10?

When you want to turn on the Temper Protection feature on your computer, you can always opt for these steps:

Hit the Start key on your keyboard to launch the Start Menu.
Once the start Menu appears, just type Windows Security and then select it from the results.
Head to the Virus & threat protection option.
Under “Virus & threat protection,” choose the Manage settings option.
Press the switch located beneath the Temper Protection option.

This will turn on the Tamper protection feature once again on your device.

James Robert is a creative person who has been writing blogs and articles about cybersecurity. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs, and websites.

Source – Enable or Disable Tamper Protection on Windows 10

How to Delete the Recycle Bin from Windows 10 Desktop?

Some people do not find the Recycle Bin icon useful on their desktop. If you want to make your desktop less cluttered, then you can remove the Recycle Bin. In this blog, we will discuss the process of deleting the Recycle Bin from the Windows 10 desktop.

Technology

Delete Recycle Bin Via the Icon Settings

If you want to delete Recycle Bin via the icon settings, then you need to follow the instructions given below.

First of all, you have to press the Windows key on the keyboard.
Then you should select the Settings icon.
You should choose the Personalization option.
Navigate to the left-hand side menu & select the Themes option.
Move down the Themes section & select the Desktop Icon Settings link.
Later, you have to untick the box of Recycle Bin, when the Desktop Icon Settings screen pops-up.
Select the Apply option.
To confirm, select the OK button.

Delete Recycle Bin through Show Desktop Icons

You can also delete Recycle Bin through show desktop icons option. Follow the instructions given below.

Get started by going to the desktop & right-click on your desktop’s screen.
Navigate to the drop-down menu & select “View” option.
When the side-menu will open, untick the “Show Desktop Icons” option.

Pin the Recycle Bin to the Start Menu

If you want to pin the Recycle Bin to the Start menu, then you need to follow the two methods given below.

Drag & Drop:

To get started, select the Recycle Bin on the desktop.
While left-clicking the mouse, move the Recycle Bin’s icon to the start symbol.
Leave the Recycle Bin icon above the Start menu icon.

Right Click:

Navigate to the desktop & select the Recycle Bin, right-click on it.
Then you should go to the drop-down menu & select the Start menu option.

If you would like to unpin the Recycle Bin

You have to select the Recycle Bin & right-click on it.
Now, go to the drop-down menu & select the “Unpin from the Start Menu” option.

Pin the Recycle Bin to File Explorer

You need to pin the Recycle Bin to File Explorer. Follow the instructions given below.

First & foremost, select the Recycle Bin on the desktop.
Then you should press the left button of the mouse & move the Recycle Bin icon to the Taskbar.
Later, you have to move above the File Explorer icon till you view the “Pin to the File Explorer” tool.
Now, place the Recycle Bin icon above the File Explorer icon.

Locate the Recycle Bin

If you want to locate the Recycle Bin, then you need to follow the two methods given below.

To begin with, go to the Taskbar & select the File Explorer.
Then you should click on the This PC.
You should navigate to the address bar & select the little downward arrow.
You will see a drop-down menu.
Now, you have to select Recycle Bin to launch it.

Rosy Williams is a creative person who has been writing blogs and articles about cybersecurity. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs, and websites.

Source – Delete the Recycle Bin from Windows 10 Desktop